Samsung cl29a10, cl34a10, cl29m6, cl21s8mqu, cl25m6mqu, cl29m6mqu, cl29m16mqu, cl29k5mqu Benutzerhandbuch

Seite von 63
I
N S TA L L AT I O N
16
3
Connect an S-video
cable between the 
S-VIDEO OUT jack on the
VCR and the 
S-VIDEO INPUT
jack on the TV.
An S-video cable is usually included with an S-VHS VCR. (If not, check your local 
electronics store.) 
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
Make sure the jacks you are using are underneath the number “2.”
2
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the 2 AUDIO
INPUT jacks on the TV.
1
To begin, follow steps 
1–3 in the previous 
section to connect the
antenna or cable to your
VCR and your TV.
Connecting an S-VHS VCR  
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This 
connection delivers a better picture as compared to a standard VHS VCR.)
VCR Rear Panel
Coaxial Cable
TV Rear Panel
VCR Rear Panel
Audio Cable
TV Rear Panel
VCR Rear Panel
Video Cable
TV Rear Panel