Samsung ITP-5107SIP Benutzerhandbuch
System Server Setup
From the Main Setup Menu, the fifth item [5. SYSTEM SERVER SET UP] sets or
modifies settings related to registering the phone to the MCP. You can obtain this
information from your system administrator. The screen below is displayed.
modifies settings related to registering the phone to the MCP. You can obtain this
information from your system administrator. The screen below is displayed.
You can set/modify the IP address of the MCP at the [1. SERVER IP ADDRESS] item.
The screen below is displayed when you enter the item. The server IP is the IP
address of the MCP2/MCP.
The screen below is displayed when you enter the item. The server IP is the IP
address of the MCP2/MCP.
You can confirm the current IP address of the MCP at the LCD panel. The address
is left blank if it is not set. Use the dial buttons from [0]-[9], and [
is left blank if it is not set. Use the dial buttons from [0]-[9], and [
] to set the IP
address and press the SPEAKER button to save and exit. Select the [2. SERVER
ID] menu. Use the HOLD button to backspace.
ID] menu. Use the HOLD button to backspace.
You must input the ID assigned to your ITP phone. See your phone system admin-
istrator to get this value. Press the SPEAKER button to save and exit. Select the [3.
SERVER PASS] item.
istrator to get this value. Press the SPEAKER button to save and exit. Select the [3.
SERVER PASS] item.
You must input the password associated with your ID. See your phone system
administrator to get this value. Press HOLD to backspace. Press the SPEAKER but-
ton to save and exit.
administrator to get this value. Press HOLD to backspace. Press the SPEAKER but-
ton to save and exit.
Completion of Settings
From the main menu, select the seventh item [7. REBOOT] to save all modified
settings and reboot the ITP-5107S phone.
settings and reboot the ITP-5107S phone.
13
1.SERVER IP ADDRESS
INPUT SERVER IP ADDRESS
xxx.xxx.xxx.xxx
INPUT SYSTEM ID
INPUT SYSTEM PASSWORD
5107S_keyset.qxp 5/9/2006 9:56 AM Page 19