Samsung wf-j1461 Benutzerhandbuch

Installing the washing machine

 

CONNECTING THE WATER SUPPLY HOSE

The water supply hose must be connected to the washing machine at one end and to the water faucet at 
the other. Do not stretch the water supply hose. If the hose is too short and you do not wish to move the 
water faucet, replace the hose with a longer, high pressure hose.

To connect the water supply hose:
1.  Take the L-shaped arm fitting for the cold water 

supply hose and connect to the cold water supply 
intake on the back of the machine. Tighten by hand.

2.  Connect the other end of the cold water supply hose 

to your sink’s cold water faucet and tighten it by hand. 
If necessary, you can reposition the water supply hose 
at the washing machine end by loosening the fitting, 
rotating the hose, and retightening the fitting.

POSITIONING THE DRAIN HOSE

The end of the drain hose may be positioned in three ways:

Over the edge of a sink

The drain hose must be placed at a height of between 
60 and 90 cm. To keep the drain hose spout bent, use 
the supplied plastic hose guide. Secure the guide to the 
wall with a hook or to the faucet with a piece of string to 
prevent the drain hose from moving.

ln a sink drain pipe branch

The drain pipe branch must be above the sink siphon so that the end of the hose is at least  
60 cm above the ground.

ln a drain pipe

Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than  
60 cm and no longer than 90 cm.

01 Installing the washing machine