Sony BDP-S350 Benutzerhandbuch
55
A
d
d
iti
o
n
a
l I
n
fo
rm
a
tio
n
There is no picture or no sound when
connected to the HDMI OUT jack.
connected to the HDMI OUT jack.
, Try the following:
1
Turn the player off
and on again.
2
Turn the connected
equipment off and on again.
3
Disconnect
and then reconnect the HDMI cable.
There is no picture or picture noise
appears when connected to the HDMI OUT
jack.
appears when connected to the HDMI OUT
jack.
, The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
protection technology.
, If the HDMI OUT jack is used for video
No sound is output from the HDMI OUT
jack.
jack.
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
signals).
The sound is not output correctly when
connected to the HDMI OUT jack.
connected to the HDMI OUT jack.
, The device connected to the HDMI OUT
The display language on the screen
switches automatically when connected to
the HDMI OUT jack.
switches automatically when connected to
the HDMI OUT jack.
(page 49), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
The “Control for HDMI” function does not
work (BRAVIA Sync).
work (BRAVIA Sync).
, Check that the AC power cord of the
connected component is securely
connected.
connected.
, If the HDMI indicator does not appear in
, Set “Control for HDMI” to “On” (page 49).
, Make sure that the connected component is
compatible with the “Control for HDMI”
function. For details, refer to the operating
instructions supplied with the component.
function. For details, refer to the operating
instructions supplied with the component.
, Check the connected component’s setting
for the “Control for HDMI” function. For
details, refer to the operating instructions
supplied with the component.
details, refer to the operating instructions
supplied with the component.
, If you change the HDMI connection, turn
the player off and on again.
, If power failure occurs, set “Control for
HDMI” to “Off,” then set “Control for
HDMI” to “On” (page 49).
HDMI” to “On” (page 49).
, For details on the “Control for HDMI”
, If you connect the player to a TV through an
AV amplifier (receiver) that is not
compatible with the “Control for HDMI”
function, you may be unable to control the
TV from the player.
compatible with the “Control for HDMI”
function, you may be unable to control the
TV from the player.
The external memory is not recognized.
, Try the following:
1
Turn the player off.
2
Align the V mark of the EXT slot with
the V mark on the external memory, and
insert the external memory (page 23).
insert the external memory (page 23).
3
Turn the player on.
4
Check that the
EXT indicator lights up in the front panel
display.
display.
Bonus contents or other data that are
contained in a BD-ROM cannot be played.
contained in a BD-ROM cannot be played.
, Try the following:
1
Remove the disc.
2
Turn the player off.
3
Remove and re-
insert the external memory (page 23).
4
Turn the player on.
5
Check that the
EXT indicator lights up in the front panel
display.
display.
6
Insert the BD-ROM with
BonusView.
A message indicating that the local
storage does not have enough space
appears on the screen.
storage does not have enough space
appears on the screen.
, Delete unnecessary data in the external
memory (page 33).
HDMI
External memory (local
storage)
storage)
,continued