Sony CAV-CVS12ES Benutzerhandbuch

12

SONY CAV-CVS12ES (US) 3-198-136-11(1)

This chapter provides additional 

information that will help you understand 

and maintain your system.



  Should any solid object or liquid fall into the cabinet, unplug the 

Component Video Switcher and have it checked by a qualified service 
technician before operating it any further.



  Before operating the unit, check that the operating voltage of the unit 

is identical to that of your local power supply. The operating voltage is 
indicated on the nameplate on the back of the unit.



  If you are not going to use the unit for a long time, be sure to 

disconnect it from the AC power source. To disconnect the lead, grasp 
the plug itself; never pull the cord.



  Install this system so that the power cord can be unplugged from the 

wall socket immediately in the event of trouble.



  Place the unit in a location with adequate ventilation to prevent heat 

build-up in the Component Video Switcher.



  Do not place the unit on a soft surface such as a rug that might block 

the ventilation holes on the bottom.



  Do not place the unit in a location near heat sources, or in a place 

subject to direct sunlight, excessive dust, or mechanical shock.



  Clean the cabinet, panel, and controls with a soft cloth slightly 

moistened with a mild detergent solution. Do not use any type of 
abrasive pad, scouring powder, or solvent, such as alcohol or benzine.



  If the system is brought directly from a cold to a warm location, 

moisture may condense on the surface of the unit or inside the unit. 
Should this occur, the system may not operate properly. In this case, 
turn off and leave the system until the moisture evaporates. Do not 
use the system until the moisture evaporates, otherwise it may cause a 
malfunction.

If you have any questions or problems concerning the 

Component Video Switcher, please consult your nearest Sony 

dealer.