Sony CDX-R3350 Benutzerhandbuch
18
CDX-R3350C/R3350
2-515-510-21 (1)
H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm
masterpage:Left
Error displays/Messages
Radio reception
The stations cannot be received.
The sound is hampered by noises.
The sound is hampered by noises.
• Connect a power aerial control lead (blue) or
accessory power supply lead (red) to the power
supply lead of a car’s aerial booster (only when
your car has built-in FM/MW/LW aerial in the
rear/side glass).
supply lead of a car’s aerial booster (only when
your car has built-in FM/MW/LW aerial in the
rear/side glass).
• Check the connection of the car aerial.
• The auto aerial will not go up.
• The auto aerial will not go up.
t Check the connection of the power aerial
control lead.
• Check the frequency.
Preset tuning is not possible.
• Store the correct frequency in the memory.
• The broadcast signal is too weak.
• The broadcast signal is too weak.
Automatic tuning is not possible.
• Setting of the local seek mode is not correct.
t Tuning stops too frequently:
Press (SENS) until “LOCAL-ON” appears.
t Tuning does not stop at a station:
Press (SENS) repeatedly until “MONO-
ON” or “MONO-OFF” (FM), or “LOCAL-
OFF” (MW/LW) appears.
ON” or “MONO-OFF” (FM), or “LOCAL-
OFF” (MW/LW) appears.
• The broadcast signal is too weak.
t Perform manual tuning.
During FM reception, the “ST” indication
flashes.
flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
• The broadcast signal is too weak.
t Press (SENS) to set the monaural reception
mode to “MONO-ON.”
An FM programme broadcast in stereo is
heard in monaural.
heard in monaural.
The unit is in monaural reception mode.
t Press (SENS) untill “MONO-OFF” appears.
t Press (SENS) untill “MONO-OFF” appears.
RDS
The SEEK starts after a few seconds of
listening.
listening.
The station is non-TP or has weak signal.
t Deactivate TA (page 9).
t Deactivate TA (page 9).
No traffic announcements.
• Activate TA (page 9).
• The station does not broadcast any traffic
• The station does not broadcast any traffic
announcements despite being TP.
t Tune in another station.
t Tune in another station.
PTY displays “- - - - - - - -.”
• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the programme
• RDS data has not been received.
• The station does not specify the programme
type.
BLANK
*
1
*
3
Tracks have not been recorded on the MD*
2
.
t Play an MD with recorded tracks.
ERROR
*
1
• The disc is dirty or inserted upside down.*
2
t Clean or insert the disc correctly.
• The disc cannot play because of some problem.
t Insert another disc.
FAILURE
The speaker/amplifier connection is incorrect.
t See the supplied installation/connections
t See the supplied installation/connections
manual to check the connection.
LOAD
*
3
The changer is loading the disc.
t Wait until loading is complete.
t Wait until loading is complete.
L.SEEK +/–
The local seek mode is on during automatic
tuning.
tuning.
NO AF
There is no alternative frequency for the current
station.
t Press (SEEK) +/– while the station name is
station.
t Press (SEEK) +/– while the station name is
flashing. The unit starts searching for another
frequency with the same PI (Programme
Identification) data (“PI SEEK” appears).
frequency with the same PI (Programme
Identification) data (“PI SEEK” appears).
NO DATA
*
3
All custom names have been deleted, or none are
stored.
stored.
NO DISC
*
3
The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.
t Insert discs in the changer.
NO ID3
ID3 tag information is not written in the MP3
file.
file.
NO INFO
Text information is not written in the ATRAC3/
ATRAC3plus file.
ATRAC3plus file.
NO MAG
*
3
The disc magazine is not inserted in the CD
changer.
t Insert the magazine in the changer.
changer.
t Insert the magazine in the changer.
NO MUSIC
The disc is not a music file.
t Insert a music CD in this unit or MP3
t Insert a music CD in this unit or MP3
playable changer*
3
.
NO NAME
A track/group/disc name is not written in the
track.
track.
NO TP
The unit will continue searching for available TP
stations.
stations.