Sony CSS-PHB Benutzerhandbuch
14-GB
Symptom
The connection between the printer
and the Cyber-shot Station cannot be
established
and the Cyber-shot Station cannot be
established
Unable to print images
Printing is canceled
The CHARGE lamps light up when no
camera is placed on the Cyber-shot
Station
camera is placed on the Cyber-shot
Station
Unable to shoot an image when
pressing the SHUTTER button
pressing the SHUTTER button
Unable to start the interval shooting
Interval shooting is continuously
working even when “Memory Stick” is
full
working even when “Memory Stick” is
full
Cause/Solution
• The printer may not be PictBridge-compliant.
t Ask the printer manufacturer whether your
printer is PictBridge-compliant.
• The printer is not set for the connection with the
camera.
t Be sure that the printer is on to connect with
the camera.
• The Cyber-shot Station is not connected to the
printer properly.
t Check that the Cyber-shot Station and the
printer are properly connected using the USB
cable.
cable.
• The camera is not placed on the Cyber-shot Station
correctly.
t Place the camera correctly.
• The printer is not turned on.
t Turn on the printer.
For further infomation, refer to the operating
instructions supplied with the printer.
instructions supplied with the printer.
• Movies cannot be printed.
• Still images modified with a computer or still
• Still images modified with a computer or still
images taken using other than the camera
compatible with this Cyber-shot Station may not
be able to be printed.
compatible with this Cyber-shot Station may not
be able to be printed.
• You disconnected the USB cable before the
mark disappeared.
• You removed the camera from the Cyber-shot
Station before the
mark disappeared.
• When the camera was not placed on the Cyber-
shot Station, you have pressed the Control buttons
(in the order of v/b/V/B), then pressed the
POWER button and now the Cyber-shot Station is
in the demonstration mode.
(in the order of v/b/V/B), then pressed the
POWER button and now the Cyber-shot Station is
in the demonstration mode.
t To cancel the demonstration mode, discconect
the AC adaptor once and connect it again.
Alternatively, place the camera on the Cyber-
shot Station.
Alternatively, place the camera on the Cyber-
shot Station.
• The AC adaptor is disconnected.
t Connect the AC adaptor properly.
• The camera is turned off.
t Turn on the camera.
• The camera is not set to the Shooting mode.
t Set the Shooting mode.
For further infomation, refer to the operating
instructions supplied with the camera.
instructions supplied with the camera.
• The AC adaptor is disconnected.
t Connect the AC adaptor properly.
• The interval selector is not set correctly.
t Set the interval selector correctly.
• Interval shooting automatically work up to 12
times. When the “Memory Stick” is full, still
images will not be recorded.
images will not be recorded.