Sony D-NE920LS Benutzerhandbuch

Seite von 43
Symptom
Cause and/or corrective action
Playback starts from the point you 
stopped (resume function).
 The resume function is working. To start play from the first 
track, press 
 on the remote while the player is stopped (on 
the player, press and hold 
 on the jog lever) until the first 
track starts playing, or open the lid of the player (
 page 17). 
Or, remove all power sources, and then insert the battery or 
connect the AC power adaptor again.  
During playback of an ATRAC 
CD or MP3 CD, the CD does not 
rotate but you can hear the sound 
normally. 
 This player is designed to stop the rotation of an ATRAC CD 
or MP3 CD during playback to reduce the power consumption. 
The player is not malfunctioning.
“No File” appears on the display 
after you press 
 on the remote 
(on the player, after you press 
 
on the jog lever) or when the lid of 
the player is closed.
 There are no ATRAC3plus/MP3 files on the CD-R/CD-RW.
 A CD-R/CD-RW from which the data has been erased is being 
used.
 The CD is dirty.
The LCD display becomes hard to 
see or slows down.
 You are using your CD player at high temperatures (above 
40°C/104°F) or at low temperatures (below 0°C/32°F).  At 
room temperature, the display will return to its normal 
operating condition.
 is flashing quickly on the 
display of the remote control, and 
you cannot locate the beginning 
of the track or a specific point in 
the track.
 The CD player has entered the preparation stage of Bookmark 
play.  Change the PLAY MODE setting to “ALL” (
 page 23).
Even though you have not selected 
“BOOKMARK,”   (Bookmark) 
flashes.
 If you have selected a playback option other than 
“BOOKMARK,”   (Bookmark) flashes.
Play stopped abruptly.
 The off timer has been set.  Change the setting of “TIMER” to 
“OFF” (
 page 31).
 The rechargeable battery or the dry battery is used up 
completely.  Charge the rechargeable battery (
 page 11), 
or replace the  dry battery with a new LR6 (size AA) alkaline 
battery (
 page 13).
You cannot operate the player, and 
a sequence of 8 numbers or letters 
appear on the display of the CD 
player and the remote.
 This phenomenon may occur, depending on the CD you are 
using. Remove all power sources, and then insert the battery 
or reconnect the AC power adaptor. Try to operate the player 
again. If the problem persists, consult your nearest Sony dealer.
36
D-NE920/NE920LS.GB.2-318-333-14(1)