Sony DAR-RH1000 Benutzerhandbuch

Selects the surround speaker position and whether 
to engage the speakers. 

Set the distance from your listening position to the 
front speakers in “Front” (front speaker) first (

A

). 

Then adjust the values in “Center” (centre 
speaker) (

B

) and “Surround” (surround speaker) 

(

C

). For speaker placement, see page 16.

• The settings below may not be the defaults if you 

followed the “Room Size” setup of “Step 8: Easy 
Setup” (page 34) to reflect the current speaker 
placement.

• Change your current settings again should you change 

the speaker positions.

Set the front speaker distance within 1.0 to 7.0 m (set 
in 0.2 m increments). The default setting is “1.6.”

Set the centre speaker distance between the “Front” 
setting and -1.6 m of the “Front” setting (set in 0.2 
m increments). The default setting is “1.6.”

Set the surround speaker distance between the 
“Front” setting and -4.6 m of the “Front” setting. (set 
in 0.2 m increments). The default setting is “1.6.”

• When you select an item, sound momentarily cuts off.
• If front and surround speakers are not placed at an 

equal distance from your listening position, set the 
distance according to the closest speaker.

• Do not place the surround speakers farther away from 

your listening position than the front speakers.

• Depending on the input signal, the distance settings 

may not be effective.

Yes

Fixed setting.

Yes

Normally, select this.

None

Select this if no centre speaker is 
used.

Behind

Select this if the surround speakers 
are located in B

Side

Select this if the surround speakers 
are located in A.

None

Select this if no surround speaker 
is used.

Yes

Fixed setting.

A

A

B

B

A

C

B

C

A

,continued