Sony DCR-DVD200E Benutzerhandbuch

-GB

Set 

 (MANUAL SET) – [WHT BAL] to

[AUTO] in the SETUP display.

Note
In the [HOLD] white balance mode, set the
white balance to [AUTO] and reset it to
[HOLD] after a few seconds:

– when you change the [PROGRAM AE]

setting.

– when you take your camcorder outdoors

from inside a house, or vice versa.

Tips
•If the picture is being taken in a studio lit by

TV lighting, it is recommended that you
record in the [INDOOR] mode.

•When you record under fluorescent lighting,

use the [AUTO] or [HOLD] mode.
Your camcorder may not adjust the white
balance correctly in the [INDOOR] mode.

•In the automatic white balance mode, point

your camcorder at a white subject for about
10 seconds after turning the power on to get
a better adjustment:
– after you replace the battery pack.
– when you take your camcorder outdoors

from inside a house while holding the
exposure, or vice versa.

•When you slide the NIGHTSHOT switch to

ON, white balance returns to [AUTO].

You can record a 16:9 wide picture to watch on
a 16:9 wide-screen TV (16:9WIDE).
Black bands appear on the LCD display during
recording in 16:9WIDE mode [a]. The picture
during playback on a normal TV [b]* or on a
wide-screen TV [c] is compressed in the
longwise direction. If you set the screen mode
of the wide-screen TV to the full mode, you
can watch pictures of normal images [d].
Refer also to the operating instructions of your
TV.

16:9WIDE

* The picture played back in the wide mode on

a normal TV appears the same as the picture
played back in the wide mode on your
camcorder [a].