Sony DCR-HC33E Benutzerhandbuch

DCR-HC32E/HC33E/HC39E/HC42E/HC43E 2-584-907-11(1)

On the battery pack
•  Before changing the battery pack, slide the 

POWER switch up to OFF (CHG).

•  The CHG (charge) lamp flashes during 

charging, or the battery information (p. 24) will 
not be correctly displayed under the following 
conditions.
–  The battery pack is not attached correctly.
–  The battery pack is damaged.
–  The battery pack is fully discharged. (For 

Battery Info only.)

•  The power will not be supplied from the 

battery as long as the AC Adaptor is connected 
to the DC IN jack of your camcorder or the 
Handycam Station, even when the mains lead is 
disconnected from the wall socket.

On the charging/recording/playback time
•  Times measured with the camcorder at 

25 °C (77 °F). (10 to 30 °C (50 °F to 86 °F) is 
recommended.)

•  The recording and playback time will be 

shorter when you use your camcorder in low 
temperatures.

•  The recording and playback time will be shorter 

depending on the conditions under which you 
use your camcorder.

On the AC Adaptor
•  Use the nearby wall socket when using the AC 

Adaptor. Disconnect the AC Adaptor from the 
wall socket immediately if any malfunction 
occurs while using your camcorder.

•  Do not use the AC Adaptor placed in a narrow 

space, such as between a wall and furniture.

•  Do not short-circuit the DC plug of the AC 

Adaptor or battery terminal with any metallic 
objects. This may cause a malfunction.

PRECAUTION
•  Even if your camcorder is turned off, AC power 

(mains) is still supplied to it while connected to 
the wall socket via the AC Adaptor.