Sony DRC-BT30 Benutzerhandbuch

DRC-BT30 [US, ES]_4-156-247-51(1)

the Bluetooth device to detect 
this unit.
The list of detected devices appears 

on the display of the Bluetooth 

device. This unit is displayed as 

“DRC-BT30.” If “DRC-BT30” is 

not displayed, repeat from step 1.



 For details, refer to the operating 

instructions supplied with the 

Bluetooth device.



 When pairing with a 

Bluetooth device 

that cannot display a list of detected 

devices or that has no display, you 

may pair the device by setting both 

this unit and the Bluetooth device to 

pairing mode. At this time, if passcode 

is set besides “0000” on the Bluetooth 

device, pairing cannot be done with 

this unit.

display of the Bluetooth device.

on the display of a Bluetooth 
device, input “0000.” 
Pairing is complete when the 

indicator (blue) flashes slowly. The 

message standing for “Pairing 

complete” appears on the display 

of some Bluetooth devices.

* Passcode may be called “Passkey,” “PIN 

code,” “PIN number,” or “Password.”

Passcode may not be required 

depending on the connected Bluetooth 

device. For details, refer to the operating 

instructions supplied with the Bluetooth 

device.

  Start the Bluetooth connection 

from the Bluetooth device.
This unit memorizes the device as 

the last connected device. Some 

Bluetooth devices may connect 

with the unit automatically when 

pairing is complete. 



 To pair with other 

Bluetooth devices, 

repeat steps 1 to 5 for each device.



 To delete all pairing information, see 

“Initializing the unit” (page 25).