Sony dtc-690 Benutzerhandbuch

38

)

8

1

¡

$

›

•

¶

£

7

0

The              indicator appears on the
display.

A)Insert the cassette beyond the silver

line.

B)Tab facing fowards you.
C)Window side up.

0

The                indicator appears on the
display.

Press 

0OPEN/CLOSE.

Only the digital audio tape made
especially for DAT deck is required.
Unlike a conventional analog audio
cassette tape, a digital audio tape can be
used only one side.
• Digital audio tape is designed to avoid a

dust.  Do not open the inside of the tape.

• The hole at the back of a tape is a

detector slot.  Do not cover the slot.

• When you turn on the power, the 

8

indicator flashes for a moment in the
display window. During this period, no
buttons other than the 

0OPEN/CLOSE

and 

3 buttons are operative. Wait until

flashing stops and the 

8 indicator goes

off.

• When inserting the cassette, do not push

the cassette compartment closed. Be
sure to use the 

0OPEN/CLOSE button.

When a cassette is inserted and a source
program is played back, the sampling
frequency (48 kHz, 44.1 kHz or 32 kHz) of
the source program appears in the display
window.

Å

When a recording is made, any previously
recorded signal will be erased
automatically. To prevent accidental
erasure, set the safety tab to the position
shown in the illustration.  With the hole
open, rewriting sub codes cannot be
performed.
A)Recording is impossible (with the hole

open).

B)Recording is possible (with the hole

covered).

A)

B)

C)

A)

B)

)

OPEN/CLOSE

)

OPEN/CLOSE

POWER