Sony dvo-1000md Benutzerhandbuch
Record
ing
Handling Discs
23
switch, check whether the MAIN POWER switch
on the rear panel is set to the ] (on) side.
For detailed information on how to turn the power
on or off, see “Turning the Power On/Off” on page
15.
on the rear panel is set to the ] (on) side.
For detailed information on how to turn the power
on or off, see “Turning the Power On/Off” on page
15.
2
Press the OPEN/CLOSE button.
The disc tray opens.
The message changes to “OPEN” on the front panel
display.
The message changes to “OPEN” on the front panel
display.
3
Place the disc on the tray.
4
Press the OPEN/CLOSE button. Or push the disc
tray lightly.
tray lightly.
The disc tray closes.
The DISC IN display blinks and the message “Now
loading...” appears on the front panel display.
The DISC IN display blinks and the message “Now
loading...” appears on the front panel display.
Go to the next step, after the message “Now
loading...” disappears and the DISC IN display
stops blinking.
loading...” disappears and the DISC IN display
stops blinking.
If you load discs which cannot be used with the
unit
The message “Not Supported!” appears.
In such a case, unload the disc and insert a disc that can
be used with the unit.
unit
The message “Not Supported!” appears.
In such a case, unload the disc and insert a disc that can
be used with the unit.
Unloading a disc
1
Press the OPEN/CLOSE button with the power
turned on.
The disc tray opens.
turned on.
The disc tray opens.
2
Remove the disc.
3
If you do not wish to load another disc, press the
OPEN/CLOSE button to close the disc tray.
OPEN/CLOSE button to close the disc tray.
With the recording/playback surface facing
down
down
DISC IN display