Sony DVP-NS300 Benutzerhandbuch
![Sony](https://files.manualsbrain.com/attachments/7e61ba04cadfce70cb41a1a70ef1d62a30f0a5fe/common/fit/150/50/682a2570dc00831b079177f57c62a2915dd3423eb752334060fbcf750d89/brand_logo.png)
So
und Adj
und Adj
u
s
tme
nt
s
nt
s
45
•
Dolby Digital 3 ch
•
PCM (Stereo)
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
•
Front (L)
•
Front (R)
•
Centre
•
Rear (L)
•
Rear (R)
•
Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound’s
monaural rear audio signals.
the Dolby Surround Sound processed
signals or the Dolby Digital sound’s
monaural rear audio signals.
•
LFE (Low Frequency Effect) signal
Note
If “DTS” is set to “OFF” in “AUDIO SETUP,” the
DTS track selection option will not appear on the
screen even if the disc contains DTS tracks (page 63).
DTS track selection option will not appear on the
screen even if the disc contains DTS tracks (page 63).
TV Virtual Surround Sound
Settings
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TV Virtual Surround lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers (L: left, R:
right) without using actual rear speakers.
This function is designed to work with the
LINE OUT L/R (AUDIO) and LINE (RGB)-
TV jacks.
Note that if you select one of the TVS settings
while playing a DVD, the player does not
output the following signals from the
DIGITAL OUT (COAXIAL) jack.
speakers, TV Virtual Surround lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers (L: left, R:
right) without using actual rear speakers.
This function is designed to work with the
LINE OUT L/R (AUDIO) and LINE (RGB)-
TV jacks.
Note that if you select one of the TVS settings
while playing a DVD, the player does not
output the following signals from the
DIGITAL OUT (COAXIAL) jack.
•
•
MPEG audio signals
1
Press SURROUND during playback.
The Control Bar is displayed.
2
Press SURROUND repeatedly to
select one of the TVS (TV Virtual
Surround) sounds.
select one of the TVS (TV Virtual
Surround) sounds.
Refer to the explanations given for each
item.
item.
•
TVS DYNAMIC
•
TVS WIDE
•
TVS NIGHT
•
TVS STANDARD
DOLBY DIGITAL
2 / 1
Front (L/R) Rear
(monaural)
PCM 96kHz 24bit
Quantized bit rate
Sampling frequency
SURROUND
TVS DYNAMIC
continued