Sony dvp-ns78h Benutzerhandbuch

• When you connect the player to your TV via the 

SCART jacks, the TV’s input source is set to the 
player automatically when you start playback. In 
this case, press t (TV/video) on the remote to 
return the input to the TV.

• If you set “LINE” in SCREEN SETUP to “RGB 

(COMPONENT OFF)” (page 59), the player 
outputs no component video signals.

• Be sure to disconnect the HDMI cord when 

moving the player.

• Do not apply too much pressure to the cabinet 

wall, if you place the player on the cabinet with 
the HDMI cord connected. It may damage the 
HDMI OUT jack or the HDMI cord.

• When connecting or disconnecting, do not screw 

in or rotate the HDMI connector.

By connecting to Sony components that are
compatible with the HDMI CONTROL 
function with an HDMI cord (not supplied), 
you can enjoy the following features:
• One-Touch Play (page 25)
• System-Power Off

When you turn the TV off by using the [/1 
button on the TV’s remote, the components 
compatible with HDMI CONTROL 
function turn off automatically.

Set “HDMI CONTROL” to “ON” in 
“CUSTOM SETUP” (page 61). For details 
on TV setting, refer to the operating 
instructions supplied with the TV.

Depending on the connected component, the HDMI 
CONTROL function may not work. Refer to the 
operating instructions supplied with the component.

By using the PROGRESSIVE button on the 
front panel, you can select the signal format in 
which the player outputs video signals 
(Progressive or Interlace), and the conversion 
method for progressive signals.
Each time you press the PROGRESSIVE 
button, the display changes as follows:

PROGRESSIVE AUTO

m

PROGRESSIVE VIDEO

m

NORMAL (INTERLACE)

◆PROGRESSIVE AUTO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT 

VIDEO OUT jacks.

Normally select this under the above 
condition. This automatically detects the 
software type, and selects the appropriate 
conversion method.
Note that the picture will not be clear or no 
picture will appear if you select these settings 
when either of the above conditions is not 
met.
◆PROGRESSIVE VIDEO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT 

VIDEO OUT jacks, and,

– you want to fix the conversion method to 

PROGRESSIVE VIDEO for video-based 
software.

When you play a disc recorded in the NTSC 
colour system, the player outputs the video 
signal or the Setup Display etc. in the NTSC 
colour system and the picture may not 
appear on the PAL colour system 
televisions. In this case, open the tray and 
remove the disc.

VCR

CD/DVD player

TV

Connect 
directly

,

,continued