Sony HDS-X5800 Benutzerhandbuch
1-11 (E)
HDS-X5800
Removal
Remove them by reversing the installation procedure.
Remove them by reversing the installation procedure.
HKS-5811M/5811SD (CI-29 Board)
The HKS-5811M/5811SD consist of the two types of the
boards: EQ board and CI-29 boards. Installation and
removal of the CI-29 board are described below.
For the EQ board, refer to Section 1-6-3.
boards: EQ board and CI-29 boards. Installation and
removal of the CI-29 board are described below.
For the EQ board, refer to Section 1-6-3.
Installation
1.
1.
Remove the two screws and remove the blank panel.
n
Keep the removed blank panel.
n
Keep the removed blank panel.
B3
x 4
Blank panel
2.
Insert a pair of CI-29 boards to the CASCADE IN slot
and tighten the two screws (with drop-safe) of the each
board.
m
. Insert the board while applying equal force to the
and tighten the two screws (with drop-safe) of the each
board.
m
. Insert the board while applying equal force to the
screws at both ends of the board.
. Check that the boards are securely connected to the
MB-939 board.
. Be careful not to turn them upside down by
observing the top and bottom of these boards when
installing the each board.
installing the each board.
Option name
Board name
Installation slot
HKS-5811M
CI-29 board
Connector side, The CASCADE
(2 boards
IN slot of the same position as
as a pair)
in the MX-103 board.
HKS-5811SD
CI-29 board
Connector side, The CASCADE
(2 boards
IN slot of the same position as
as a pair)
in the MX-104 board.
Removal
Remove it by reversing the installation procedure.
Remove it by reversing the installation procedure.
CI-29 board
CI-29 board
Screws
(with drop-safe)
(with drop-safe)
Screws
(with drop-safe)
(with drop-safe)
CASCADE IN slot
1-6. Installation of Optional Boards