Sony HD1000P Benutzerhandbuch
62
x
VF B.LIGHT
You can adjust the brightness of the
viewfinder.
viewfinder.
B
NORMAL
Standard brightness.
Standard brightness.
BRIGHT
Brightens the viewfinder screen.
Brightens the viewfinder screen.
x
VF COLOR
B
ON
Display pictures in the viewfinder in color.
Display pictures in the viewfinder in color.
OFF
Display pictures in the viewfinder in black
and white.
Display pictures in the viewfinder in black
and white.
b
Notes
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
selected for the setting.
• When you select [BRIGHT], battery life is
slightly reduced during recording.
Select [COMPONENT] when connecting
your camcorder to a TV with the
component input jack.
your camcorder to a TV with the
component input jack.
576i
Select when connecting your camcorder to
a TV with the component input jack.
Select when connecting your camcorder to
a TV with the component input jack.
B
1080i/576i
Select when connecting your camcorder to
a TV that has the component input jack
and is capable of displaying the 1080i
signal.
Select when connecting your camcorder to
a TV that has the component input jack
and is capable of displaying the 1080i
signal.
You can set an output video signal type
from HDV format signals.
from HDV format signals.
x
i.LINK CONV
When set to [ON:SQUEEZE]/[ON:EDGE
CROP], converts the HDV signal to the DV
format and output it from the HDV/DV
CROP], converts the HDV signal to the DV
format and output it from the HDV/DV
Interface (i.LINK). The DV format signal is
output unchanged.
output unchanged.
B
OFF
ON:SQUEZE
Output signals to a 16:9 wide TV or a TV
compatible with 16:9 wide mode.
Output signals to a 16:9 wide TV or a TV
compatible with 16:9 wide mode.
ON:EDGE CROP
Display the center of the picture in 4:3
aspect ratio by cropping the both sides of
the picture.
Display the center of the picture in 4:3
aspect ratio by cropping the both sides of
the picture.
b
Notes
• For an i.LINK input, refer to “VCR HDV/DV”
(p. 59).
• Be sure to disconnect the i.LINK cable before
changing the setting. Otherwise, the connected
device may not be able to recognize the video
signal properly.
device may not be able to recognize the video
signal properly.
x
VIDEO OUT
You can set the HDV output format for the
following outputs.
following outputs.
– COMPONENT (576i)
– S VIDEO
– AUDIO/VIDEO
– S VIDEO
– AUDIO/VIDEO
B
SQUEZE
Output signals to a 16:9 wide TV or a TV
compatible with 16:9 wide mode.
Output signals to a 16:9 wide TV or a TV
compatible with 16:9 wide mode.
COMPONENT
DOWN CONVERT
On a 4:3 TV
compatible with
16:9 wide mode
On a 16:9 wide TV
On a 4:3
standard TV
standard TV
STANDARD SET SET menu (Continued)