Sony ipela snc-rz25p Benutzerhandbuch

Ot
her

s

Using the Supplied Setup Program

67

You can set the date and time on the camera.

Click the Date time tab to display the date/time 
setting window.

Click to select the camera you want to set the date 
and time for.

You can select multiple cameras and set the date 
and time simultaneously.

Select the date/time format from the Date time 
format drop-down list.

Select the area where the camera is installed from 
the Time zone selecting drop-down list.

Set the date and time.

You can set the date and time in two ways.

Manual current date time setting
Set the current date and time on the Manual 
current date time setting boxes, and click OK.  
The setting boxes are for the year (last two digits), 
month, date, hour, minutes and seconds from left to 
right.

PC current date time setting
The date and time set on the computer is displayed 
in the PC current date time setting box.
Click OK on the right to set the camera’s date and 
time to the displayed computer's date and time.

Due to network properties, there may be a slight 
difference between the displayed computer's date and 
time and those set on the camera.

PPPoE is used to connect to an ISP (Internet Service 
Provider) via the Internet. Using PPPoE, you can 
automatically obtain an IP address to connect to the 
Internet from the ISP.

The following PPPoE setting items are provided for the 
SNC-RZ25N/RZ25P.
• User ID assigned by your ISP
• Password for the user ID
• DNS setting (automatic/manual setting)

Click the PPPoE tab to display the PPPoE setting 
window.

Click to select the camera you want to make the 
PPPoE settings for.

Select On below the list to enable the PPPoE 
setting.
To disable the PPPoE setting, select Off.

Type the user ID assigned by the ISP in the User ID 
box.

Type the password for the user ID in the Password 
box.