Sony md walkman mz-r55 Benutzerhandbuch

The input jack of this recorder works as both digital and analog input jacks. Connect the
recorder to a CD player or a cassette recorder using either digital input or analog input. To
record, see “Recording with digital input” (page 11) to record using digital input, and
“Recording an MD right away!” (page 6) to record using analog input.

z

Connectable source

Usable cord

Signal from the source

Recorded track
numbers

Recorded sound level

Equipment with an analog
(line) output jack

Line cable (with 2 phono
plugs or a stereo-mini plug)

Analog
Even when a digital source
(such as a CD) is connected,
the signal sent to the recorder
is analog.

Marked automatically
•after more than 2 seconds

of blank or low-level
segment.

•when the recorder is paused

while recording.

You can erase unnecessary
marks after recording
(“Erasing a track mark”, page
22).

Adjusted automatically. Can
also be adjusted manually
(“Adjusting the recording
level manually”, page 13).

Equipment with an optical
digital output jack

Digital cable (with an optical
or an optical-mini plug)

Digital

Marked (copied)
automatically
•at the same positions as the

source.

•when the recorder is paused

while recording.

You can erase unnecessary
marks after recording
(“Erasing a track mark”,
page 22).

Same as the source

Track marks may be copied incorrectly :
•when you record from some CD players or multi disc players using digital input.
•when the source is in shuffle or program play mode while recording using digital input. In this

case, play the source in normal play mode.

•when recording BS or CS programs through digital input.