Sony md walkman mz-r55 Benutzerhandbuch
14
Checking the remaining
time or the recording
position
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop.
number, etc. when recording or during
stop.
On the recorder
1
Press DISPLAY while recording or in
stop mode. Each time you press the
button, the display changes as
follows.
stop mode. Each time you press the
button, the display changes as
follows.
B
A
A
Track number
Track number
Current date
1)
B
Elapsed time
Remaining time for
recording
recording
Current time
1)
While recording
1)
Appears only when the clock is set.
DISPLAY
REC indicator
3
While observing the level meter in
the display, adjust the recording level
by pressing
the display, adjust the recording level
by pressing
+ (+) or = (–).
Set the level so that it hits the –12dB
at maximum input level.
.
at maximum input level.
.
Note
Adjust the recording level while the
recorder is in standby mode. You
cannot adjust it while recording.
Adjust the recording level while the
recorder is in standby mode. You
cannot adjust it while recording.
4
Press
P again to start recording.
To stop recording, press
p.
The recording level control is switched back
to automatic control when you record the
next time.
to automatic control when you record the
next time.
z
When you record with microphone input,
select the sensitivity with MIC SENS (page
12).
select the sensitivity with MIC SENS (page
12).
Volume decreases increases