Sony MEX-BT2700 Benutzerhandbuch
17
D:\Documents and Settings\takashi-shimomura\Desktop\DTP\848626S MEX-
BT2700(U)\4125798111_MEX-BT2700(U)_CaFR\01US02CD-U.fm
BT2700(U)\4125798111_MEX-BT2700(U)_CaFR\01US02CD-U.fm
masterpage:Right
MEX-BT2700
4-125-798-11 (1)
Operating an audio device with this
unit
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
* Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
performed on the audio device.
Notes
• During audio device playback, information such as
• During audio device playback, information such as
track number/time, playback status, etc., of a
connected audio device is not displayed on this unit.
connected audio device is not displayed on this unit.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
Deleting registration of all
paired devices
paired devices
1
Press (OFF).
This unit is turned off.
This unit is turned off.
2
If “
” lights, press and hold
(BT) until “
” turns off.
3
Press and hold the select button.
4
Press the select button repeatedly
until “BT INIT” appears.
until “BT INIT” appears.
5
Press (SEEK) +.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while “INITIAL” is
flashing.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not turn off the power while “INITIAL” is
flashing.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
1
Press the select button repeatedly
until the desired item appears.
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
After 5 seconds, the setting is complete and
the display returns to normal play/reception
mode.
selected item.
After 5 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
reference for details):
To
Press
Play
(6) (PAUSE)* on this unit.
Pause
(6) (PAUSE)* on this unit.
Skip tracks
SEEK –/+ (
.
/
>
) [once for
each track]
EQ3
Selects an equalizer curve from 7 music types.
LOW*
1
, MID*
1
, HI*
1
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
right speakers.
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
rear speakers.
SUB*
2
(Subwoofer volume)
Adjusts the subwoofer volume.
(“ATT” is the lowest setting.)
(“ATT” is the lowest setting.)
AUX*
3
(AUX level)
Adjusts the volume level for each connected
auxiliary equipment: “+18 dB”– “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
auxiliary equipment: “+18 dB”– “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
BTA*
4
(BT-Audio level)
Adjusts the volume level for each connected
Bluetooth audio device. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level: “+18 dB” – “0 dB” – “–8 dB”
Bluetooth audio device. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level: “+18 dB” – “0 dB” – “–8 dB”
*1 When EQ3 is activated.
*2 When the audio output is set to “SUB-OUT”
*2 When the audio output is set to “SUB-OUT”
*3 When AUX source is activated.
*4 When Bluetooth audio source is activated
*4 When Bluetooth audio source is activated