Sony MEX-DV1100 Benutzerhandbuch
46
Selecting an auxiliary device
1 Press (SRC) repeatedly until “AUX” appears
on the main unit.
2 Press (MODE) to select “FRONT-IN” or
“REAR-IN.”
Operate by the auxiliary device itself.
Operate by the auxiliary device itself.
Adjusting the volume level
Be sure to adjust the volume of each connected
device before playback.
device before playback.
1 Turn down the volume on the unit.
2 Press (SRC) repeatedly until “AUX” appears
on the main unit.
If two auxiliary devices are connected, select
the device to adjust its volume by pressing
(MODE).
If two auxiliary devices are connected, select
the device to adjust its volume by pressing
(MODE).
3 Start playback of the auxiliary device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press (SYSTEM SETUP).
6 Press
M/m to select “AUX-LVL,” then press
(ENTER).
7 Press
M/m to adjust the input level.
The input level is adjustable in single steps,
between –6 and +18.
between –6 and +18.
8 Press (ENTER).
The setting is complete.
With the main unit
Press (SOURCE) instead of (SRC), rotate the volume
control dial instead of pressing
Press (SOURCE) instead of (SRC), rotate the volume
control dial instead of pressing
M/m.
CD changer
Selecting the changer
1 Press (SRC) repeatedly until “CDC” appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Playback starts.
With the main unit
Press (SOURCE) instead of (SRC).
Press (SOURCE) instead of (SRC).
Skipping albums and discs
1 During playback, press
M/m.
With the main unit
Use (3)/(4) (ALBUM –/+) instead of
Use (3)/(4) (ALBUM –/+) instead of
M/m.
To skip
Press
M/m
album
and release (hold for a
moment).
moment).
album
continuously
continuously
within 2 seconds of first
releasing.
releasing.
discs
repeatedly.
discs
continuously
continuously
then, press again within 2
seconds and hold.
seconds and hold.
Z
X
Z
PL
M/m
ENTER
MODE
SRC
Disc number
Unit number