Sony MDX-CA790X Benutzerhandbuch
20
By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change discs during MD (CD) playback*
– Change discs during MD (CD) playback*
1
.
Push in, then rotate and hold for a
moment to:
moment to:
– Enter the GP*
3
skip mode. Within 2
seconds, push in and rotate again for
continuous skip.
continuous skip.
During playback of a CD containing MP3
files
files
*
4
Push in and repeat rotating quickly to:
– Change discs one by one.
Push in, then rotate and hold for a
moment to:
moment to:
– Enter the album skip mode. Within 2
seconds, push in and rotate again for
continuous skip.
continuous skip.
*1
Only if the corresponding optional equipment is
connected.
connected.
*2
If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold
ignition key switch, after turning off the ignition, be
sure to press and hold
(OFF)
until the display
disappears.
*3
Available only when an MD containing groups is
inserted in this unit and played.
inserted in this unit and played.
*4
Available only when optional CD unit with the MP3
file control function is connected.
file control function is connected.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
the right hand side of the steering column, you
can reverse the operative direction.
Press
(SEL)
for 2 seconds while
pushing the VOL control.
Note
If you press
If you press
(SEL)
for 2 seconds while pushing the
VOL control, “NORM” or “REV” appears in the display.
– “NORM” is to use the rorary commander at the
– “NORM” is to use the rorary commander at the
factory-set position.
– “REV” is to use the rorary commander when it is
mounted on the right side of the steering column.
SEEK/AMS
control
control
PRESET/DISC
control
control
To increase
To decrease