Sony NW-S205F Benutzerhandbuch

NW-S203F/S205F.GB.2-699-315-12(2)

 

 



  After pressing the  button to decide “Walk Stride>,” rotate the 

the  button to confirm.

Step length is calculated by the height value (set in step 



) × 0.5.



  After pressing the  button to decide “Run Stride>,” rotate the 

the  button to confirm.

Step length is calculated by the height value (set in step 



) × 0.7.

Press the DISP/HOME button.



 You can set the height from 80 to 250 cm (31 to 99 inch), the weigh from 10 to 300 

kg (22 to 660 lb). In case of other values, you can set from “Less” (minimum value) or 

“More” (maximum value). Select the approximate value.

 We recommend using the supplied clip or arm band ( page 6) when using the player. 

However the player may not be able to count steps properly depending on how the 

player is attached, or the following cases.

–  If you use the player with a strap (sold separately) around your neck, waist, bag, etc.

–  If you use the player inside a bag swinging randomly.

–  If you use the player during up and down movement or swaying from side to side in a 

vehicle.

–  If you use the player during active sports requiring up and down movement or subject 

the player to excessive shock.

 The player calculates the distance and calorie-count based on the step count and height/

weight/step length you set ( page 38). Inaccuracies may occur depending on how the 

player is attached, age, or gender. Use this function as a guide.

 When you measure calories, the G Sensor menu ( page 40) needs to be activated.

 The information you set for “Height/Weight” is used only for the purpose of measuring 

the distance of movement and calories consumed. This information is not output via the 

USB connection.

 If you change the value of the height (step 



) after setting the step length steps in 



 

and 



, the step length is also changed to be calculated again.