Sony pcv-rx306 Benutzerhandbuch
![Sony](https://files.manualsbrain.com/attachments/7e61ba04cadfce70cb41a1a70ef1d62a30f0a5fe/common/fit/150/50/682a2570dc00831b079177f57c62a2915dd3423eb752334060fbcf750d89/brand_logo.png)
Sony V
A
IO
Desktop User
Guide
Upgrading your VAIO computer
80
Installing a new memory module
If you are not familiar with upgrading memory on a computer, we highly recommend that you contact your
dealer.
dealer.
To add or change a memory module, proceed as follows:
1
Shut down the computer, unplug it, and remove any peripheral devices. Wait for the computer to cool
down.
down.
2
Open the unit (see Opening the side cover
3
Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to
access the DIMM slots.
You must remove the power supply before installing the memory modules. Remove the power supply by
following these steps:
access the DIMM slots.
You must remove the power supply before installing the memory modules. Remove the power supply by
following these steps:
❑
Remove the screw that secures the power supply to the rear of the chassis.
❑
Pull the tab that latches the power supply to the chassis.
❑
Slide the power supply up until the power supply clears the chassis.
❑
Rotate the power supply to an upside down position and rest it on top of the chassis where the hard
drive is located.
drive is located.
4
Handle the memory only by the edges, and remove it from its anti-static package.
5
Locate the notch on the bottom edge of the memory module (1).
6
Align the memory module over the slot, making sure the module is facing the correct way (2).