Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Sony
  4. pdw-f30
  5. Benutzerhandbuch

Sony pdw-f30 Benutzerhandbuch

Download
Seite von 113
30
24P (23.98P) Mode Settings
  Chap
te
r 2 
 Pr
epa
ra
tio
n
s
14
Press the 
m/MARK2 button to select “23.98P”.
15
If you want to change the monitor output setting as 
well, press the 
</IN button to return to the higher 
level screen (the state of step 11). If you do not want 
to change the monitor output setting, proceed to step 
19.
16
Press the 
m/MARK2 button to select “23.9P 
OUTPUT”.
17
Press the 
,/OUT button.
The setting value appears.
18
Press the 
M/MARK1 or m/MARK2 button to select 
one of the following.
23.98PsF: Output as 23.98P.
2-3 PULL DOWN: Output after pulldown conversion 
to 59.94i.
19
Press the SET button.
A confirmation message appears.
20
Press the SET button to confirm the changes, or the 
RESET button to cancel them.
If you have pressed the SET button, power the unit off 
and on again to enable the changes.
Output Signals in 24P (23.98P) Mode
The following tables show the signals output by the unit 
when “23.98PsF” and “2-3 PULL DOWN” are selected.
Output signals
Timecode display 
Timecode in remote timecode mode
See the optional “9pin Manual ‘PDW Series PROTOCOL 
OF REMOTE(9-pin) CONNECTOR’” for more 
information about remote timecode mode.
SETUP MENU
OPERATIONAL FUNCTION
  
SYSTEM SEL
    SYSTEM FREQ : 601
     
 * 60I
        50I
        30P
        25P
        23.98P
SETUP MENU
OPERATIONAL FUNCTION
  
SYSTEM SEL
    23.9P OUTPUT: PsF
      *  23.98PsF
         2-3 PULL DOWN
Output
Type
23.98PsF
2-3 PULL 
DOWN
Output 
signals
Composite 
output 
No output 
Video and 
audio signals 
pulled down to 
59.94i
i.LINK DV 
output
i.LINK TS 
output
Timecode 
output 
COMPOSITE 
VITC output
–
30-frame 
timecode after 
pulldown 
conversion
Type
23.98PsF
2-3 PULL DOWN
LTC display 
24-frame timecode 
PDT display
–
30-frame timecode 
after pulldown 
conversion
VITC display
24-frame timecode 
COUNTER display  24-frame signals 
30-frame signals 
after pulldown 
conversion
Type
23.98PsF
2-3 PULL DOWN
9-pin preset 
timecode 
24-frame timecode
9-pin preset 
timer 1 (Counter)
24-frame signals 
30-frame signals 
after pulldown 
conversion
9-pin scene 
timecode 
24-frame timecode
30-frame timecode 
after pulldown 
conversion
9-pin scene 
timer 1 (Counter)
24-frame signals 
30-frame signals 
after pulldown 
conversion