Sony pdw-f30 Benutzerhandbuch
39
Recording
Chapt
er
3
Rec
o
rd
ing and
P
la
y
bac
k
The TC PRESET MODE screen appears.
5
Use the arrow buttons and the RESET button to set the
initial timecode value.
initial timecode value.
</IN button or ,/OUT button: Select the digit to
change (it flashes).
M/MARK1 button or m/MARK2 button: Change
the value of the selected digit.
RESET button: Reset all digits to 0.
To cancel the timecode setting
Press the MENU button.
Press the MENU button.
6
Press the SET button.
The message “NOW SAVING...” appears, and the
timecode set in step 5 is displayed.
If RUN MODE on page P1 of the function menu is set
to “FREE RUN”, timecode begins to advance from the
initial value you just set.
timecode set in step 5 is displayed.
If RUN MODE on page P1 of the function menu is set
to “FREE RUN”, timecode begins to advance from the
initial value you just set.
To set timecode to the current time
1
Set RUN MODE on page P1 of the function menu to
“FREE RUN”, and set DF/NDF to “DF”.
“FREE RUN”, and set DF/NDF to “DF”.
2
Carry out steps 1 to 5 of the previous section “To
record timecode after setting an initial value (Internal
Preset)” to set the timecode to a time slightly ahead of
the current time.
record timecode after setting an initial value (Internal
Preset)” to set the timecode to a time slightly ahead of
the current time.
3
Press the SET button at the instant when the current
time matches the displayed timecode.
time matches the displayed timecode.
To set user bits
You can record up to eight hexadecimal digits of
information (date, time, clip number, etc.) in the timecode
track.
information (date, time, clip number, etc.) in the timecode
track.
1
Set CNTR SEL on the HOME page of the function
menu to “UB”.
menu to “UB”.
2
Carry out steps 2 to 4 of the previous section “To
record timecode after setting an initial value (Internal
Preset)” (see page 38).
record timecode after setting an initial value (Internal
Preset)” (see page 38).
The UB PRESET MODE screen appears.
3
Use the arrow buttons and the RESET button to set the
user bits.
user bits.
</IN button or ,/OUT button: Select the digit to
change (it flashes).
M/MARK1 button or m/MARK2 button: Change
the value of the selected digit.
RESET button: Reset all digits to 0.
Settings are made in hexadecimal (0, 1, 2,... 8, 9, A,
B,... E, F).
B,... E, F).
To cancel the user bits setting
Press the MENU button.
Press the MENU button.
4
Press the SET button.
The message “NOW SAVING...” appears, and the
user bits set in step 3 are displayed.
user bits set in step 3 are displayed.
To record timecode that follows
sequentially upon the last recorded
timecode (Internal Regen)
sequentially upon the last recorded
timecode (Internal Regen)
You can record timecode so that it is continuous from one
clip to the next on the disc.
Set TC MODE on page P1 of the function menu to “INT”,
and TCG to “REGEN”. When this setting is in force, the
unit reads the timecode of the last frame of the last
recorded clip on the disc before starting to record, and
internally generates timecode that follows upon the
recorded timecode.
In this case, the setting of DF/NDF on page P1 of the
function menu is ignored. New timecode is recorded in the
drop-frame mode of the last recorded timecode on the disc.
clip to the next on the disc.
Set TC MODE on page P1 of the function menu to “INT”,
and TCG to “REGEN”. When this setting is in force, the
unit reads the timecode of the last frame of the last
recorded clip on the disc before starting to record, and
internally generates timecode that follows upon the
recorded timecode.
In this case, the setting of DF/NDF on page P1 of the
function menu is ignored. New timecode is recorded in the
drop-frame mode of the last recorded timecode on the disc.
Carrying Out Recording
One recording segment (from the start to the end of
recording) is called a “clip”.
recording) is called a “clip”.
See Chapter 4 “Scene Selection” for more information
about clips.
about clips.
TC PRESET MODE
TCG 00:00:00:00
INC/DEC : ( )( )KEY
SHIFT : ( )( )KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
ABORT : MENU KEY
SHIFT : ( )( )KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
ABORT : MENU KEY
UB PRESET MODE
UBG 00:00:00:00
INC/DEC : ( )( )KEY
SHIFT : ( )( )KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
ABORT : MENU KEY
SHIFT : ( )( )KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
ABORT : MENU KEY