Sony pdw-v1 Benutzerhandbuch

Cha

p

te

r 7  

 Men

u

s

82

7-4 Maintenance Menu

To cancel changing a setting
Before pressing the SET button, press the MENU 
button.
The menu disappears from the status display, without 
saving the new setting.

To change network settings, carry out steps 1 to 3 in the 
item, “To display a menu item setting” above, to display 
the NETWORK CONFIG menu item, then carry out the 
following operations.

When the IP address is assigned automatically
Check that the network cable is connected to this unit 
before carrying out the operation.

Using the 

J/j buttons, display “>DHCP.”

Press the 

k button.

Press the 

j button, to display “>> ENABLE.”

Press the SET button.

To check the assigned IP address
In the NETWORK CONFIG menu, using the 

J/j 

buttons, display “>IP address,” then press the 

k 

button.

If the IP address cannot be assigned, this is shown as 
“000.000.000.000.” In this case, consult the network 
administrator.

To set the IP address
First set DHCP to “DISABLE.” (See the previous item, 
“When the IP address is assigned automatically.”)

Using the 

J/j buttons, display “>IP address.”

Press the 

k button.

The IP address appears, and the digit that can be 
changed flashes.

Set the IP address.

To select a different digit to be changed
Use the 

K/k buttons.

To change the value of a digit
Turn the jog dial or shuttle dial.
Turning clockwise increases the value, and turning 
counterclockwise decreases the value.
The 

J/j buttons can be used.

To return to the factory default setting
Press the RESET button.

When all digits are set, press the SET button.

This returns to the NETWORK CONFIG menu.

To cancel a setting
Before pressing the SET button, press the MENU 
button.
This returns to the NETWORK CONFIG menu, 
without saving the new setting.

Repeat steps 1 to 4 as required, to set the subnet mask 
and default gateway.

Flashes to indicate that the digit can be changed.