Sony 3-213-480-12(1) Benutzerhandbuch

Seite von 132
116
, The video heads are dirty (see page 118). Clean 
the video heads using a Sony video head cleaning 
cassette. If a Sony cleaning cassette is not 
available in your area, have the heads cleaned at 
your nearest Sony dealer (a standard service fee 
will be charged). Do not use a commercially 
available liquid type cleaning cassette, as it may 
damage the video heads.
, The video heads may have to be replaced. 
Consult your local Sony dealer for more 
information.
, The tape is defective.
The picture rolls vertically during picture 
search.
, Adjust the vertical hold control on the TV or 
monitor.
The picture has no sound.
, The tape is defective.
, Check the audio cord connection.
A tape cannot be inserted.
, Check that a tape is not already in the tape 
compartment.
VCR Recording
The programme position cannot be changed 
from the one you are recording.
, Set the TV’s input source to “TV.”
No TV programme appears on the TV screen.
, Make sure the TV is set to the channel for the VCR. 
If a monitor is used, set it to video input.
, Select the correct source with the PROG +/– or 
INPUT buttons. Select a programme position 
number when recording TV programmes; select 
“LINE1,” “LINE2,” or “LINE3” when recording 
from other equipment.
TV reception is poor.
, Adjust the TV aerial.
The tape starts playing as soon as it is 
inserted.
, The safety tab has been removed. To record on 
this tape, cover the tab hole.
The tape is ejected when REC is pressed.
, Check that the safety tab has not been removed.
Nothing happens when REC is pressed.
, Make sure the tape is not at its end.
VCR Timer recording
The timer does not operate.
, Check that the clock is correctly set.
, Make sure a tape has been inserted.
, Check that the safety tab has not been removed.
, Make sure the tape is not at its end.
, Make sure a programme has been set for timer 
recording.
, Make sure the timer settings are set for a future 
time.
, Check that the satellite or digital tuner is turned 
on.
, “- -:- -” appears in the front panel display if the 
recorder is disconnected from the mains for more 
than one minute. Reset the clock and timer.
, Turn the power off and unplug the mains lead.
, The recorder was already turned on at the timer 
recording start time. Set the recorder to standby 
mode before timer recording starts.
, The programme that starts first has priority and 
the second programme starts recording only after 
the first programme has finished. If the 
programmes start at the same time, the 
programme listed first in the menu has priority 
(page 82).
The 
c
 indicator flashes after timer recording is 
set.
, Check that the safety tab has not been removed.
The SYNCHRO REC indicator flashes after 
Synchro-Recording is set.
, Check that the safety tab has not been removed.
Display
Menus or displays do not appear on the 
screen.
, While the recorder is reading disc information, 
the System Menu, OPTIONS menu, or 
information display will not appear.
“- -:- -” appears in the front panel display.
, Set the clock again (page 102).
The 
c
 indicator is flashing.
, The disc does not have any space for recording.
, Insert a recordable disc or a tape with its safety