Sony RDR-GX310 Benutzerhandbuch

Seite von 100
73
Se
tti
n
g
s an
d Adj
u
st
m
ent
s
b
Note
Depending on the disc, “4:3 Letter Box” may be selected 
automatically instead of “4:3 Pan Scan” or vice versa.
Pause Mode (DVDs only)
Selects the picture quality in pause mode.
Progressive Mode
DVD software can be divided into two types: film 
based software and video based software. Video 
based software is derived from TV, such as 
dramas and sit-coms, and displays images at 30 
frames/60 fields (25 frames/50 fields) per second. 
Film based software is derived from film and 
displays images at 24 frames per second. Some 
DVD software contains both Video and Film.
In order for these images to appear natural on your 
screen when output in 
progressive
 mode (50 or 60 
frames per second), the progressive video signal 
needs to be converted to match the type of DVD 
software that you are watching.
You can fine-tune the progressive 525p/625p 
video signal that is output when you press 
PROGRESSIVE (“PROGRESSIVE” lights up). 
Note that you must connect to a progressive 
format TV using the COMPONENT VIDEO OUT 
jacks (page 14).
Line Input
Sets the method of inputting video signals from 
the LINE IN jacks on the rear panel of the 
recorder. Select an option for each of the items 
below according to the combination of jacks and 
methods that you are going to use.
Line1 Input
Selects a method of inputting video signals for the 
LINE IN 1 jack on the rear panel of the recorder.
Line3 Input
Selects the method of inputting video signals for 
the LINE IN 3 jack on the rear panel of the 
recorder. The pictures will not be clear if this 
setting does not match the type of video input 
signal.
Auto
The picture, including subjects 
that move dynamically, is output 
with no jitter. Normally select this 
position.
Frame
The picture, including subjects 
that do not move dynamically, is 
output in high resolution.
16:9
4:3 Letter Box
4:3 Pan Scan
Auto
Automatically detects the software 
type (Film-based or Video-based) 
and selects the appropriate 
conversion mode. Normally select 
this position.
Video
Fixes the conversion mode to the 
mode for Video-based software.
Video
Inputs video signals.
S Video
Inputs S video signals.
Video
Inputs video signals.
S Video
Inputs S video signals.