Sony rdr-gxd455 Benutzerhandbuch
92
Nothing was recorded even though the timer
setting is set correctly.
setting is set correctly.
, There was a power failure during recording.
, Disconnect the AC power cord from the AC
, Disconnect the AC power cord from the AC
outlet, and connect it again.
, The program contains copy protection signals
that restrict copying.
, The program that starts first has priority and the
second program starts recording only after the
first program has finished. If the programs start
at the same time, the program listed first in the
menu has priority (page 52).
first program has finished. If the programs start
at the same time, the program listed first in the
menu has priority (page 52).
, There is no DVD inserted in the recorder.
, There is not enough disc space for the recording.
, The cable box/satellite receiver was turned off.
, There is not enough disc space for the recording.
, The cable box/satellite receiver was turned off.
Recording does not stop immediately after
x
x
STOP is pressed.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
Timer recording is not complete or did not start
from the beginning.
from the beginning.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
, The recorder’s internal clock stopped due to a
power failure. The clock is automatically set by
Auto Clock Set function (page 78), but it is reset
during a power failure when the time signal
cannot be received. Reset the clock (page 78).
Auto Clock Set function (page 78), but it is reset
during a power failure when the time signal
cannot be received. Reset the clock (page 78).
, The channel or input changed from the one you
are recording.
, The program that starts first has priority and the
second program starts recording only after the
first program has finished. If the programs start
at the same time, the program listed first in the
menu has priority (page 52).
first program has finished. If the programs start
at the same time, the program listed first in the
menu has priority (page 52).
, There is not enough disc space for the recording.
The
c
indicator flashes after timer recording is
set.
, Insert a recordable disc (page 12).
, Insert a disc with any space for recording.
, The disc has 99 or more titles, which prevents
, Insert a disc with any space for recording.
, The disc has 99 or more titles, which prevents
further recording.
, The disc is protected (page 68).
The SYNCHRO REC indicator flashes after
Synchro-Recording is set.
Synchro-Recording is set.
, Insert a recordable disc (page 12).
, Insert a disc with enough space for the recording.
, The disc has 99 or more titles, which prevents
, Insert a disc with enough space for the recording.
, The disc has 99 or more titles, which prevents
further recording.
, The disc is protected (page 68).
Contents previously recorded were erased.
, Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
inserted.
Display
Menus or displays do not appear on the
screen.
screen.
, While the recorder is reading disc information,
the System Menu, OPTIONS menu, or
information display will not appear.
information display will not appear.
“- -:- -” appears in the front panel display.
, Set the clock again (page 78).
The
c
indicator is flashing.
, The disc does not have any space for recording.
, Insert a recordable disc inside the recorder.
, Insert a recordable disc inside the recorder.
The recording mode indication is incorrect.
, Since the recording mode for recorded titles is
calculated after sampling the recorded data
during playback, it may be displayed differently
from the mode you selected when recording.
However, the actual recording itself is correctly
made in the selected mode.
during playback, it may be displayed differently
from the mode you selected when recording.
However, the actual recording itself is correctly
made in the selected mode.
Remote control
The remote does not function.
, Batteries are weak.
, The remote is too far from the recorder.
, The remote’s manufacturer code returned to the
, The remote is too far from the recorder.
, The remote’s manufacturer code returned to the
default setting when you replaced the batteries.
Reset the code (page 27).
Reset the code (page 27).
, Turn on the recorder.
, The remote is not pointed at the remote sensor on
, The remote is not pointed at the remote sensor on
the recorder.
, Different command modes are set for the
recorder and remote. Set the same command
mode (page 28).
mode (page 28).