Sony RM-VL900T Benutzerhandbuch
21
GB
To clear all signals learned for a
specific component
specific component
1
While pressing COMMANDER
OFF, press the corresponding
Component Select button.
OFF, press the corresponding
Component Select button.
When you want to clear signals
learned for DECK B/A
learned for DECK B/A
Press DECK B/A to display “DECK A”or
“DECK B”. You can not clear both decks at
the same time.
“DECK B”. You can not clear both decks at
the same time.
2
While pressing the RESET key,
press that Component Select
button again.
press that Component Select
button again.
The learned contents are cleared. The
keys for the component return to their
original states before learning.
keys for the component return to their
original states before learning.
3
Press COMMANDER OFF.
Note
For DECK B/A, be sure to display the deck
that has a learned signal (“DECK A” or “DECK
B”) before you perform the steps above. If you
reset the wrong deck, the component codes for
both A and B will be reset to the factory
settings (page 8).
that has a learned signal (“DECK A” or “DECK
B”) before you perform the steps above. If you
reset the wrong deck, the component codes for
both A and B will be reset to the factory
settings (page 8).