Sony STR-DH810 Benutzerhandbuch

 

 

 

 

 

 

 

You can make settings for video.

x RESOLUTION

Lets you convert the resolution of analog 
video input signals (component video and 
video) and output from the HDMI TV OUT 
jack.
• AUTO

The resolution is set automatically, 
depending on the connected TV.

• 480/576p

The resolution is set to 480p/576p. Video 
signals are upconverted and output through 
the receiver.

• 720p

The resolution is set to 720p. Video signals 
are upconverted and output through the 
receiver.

• 1080i

The resolution is set to 1080i. Video signals 
are upconverted and output through the 
receiver.

• 1080p

The resolution is set to 1080p. Video signals 
are upconverted and output through the 
receiver.

If you select a resolution that the connected TV does 
not support in “RESOLUTION”, the images from 
the TV will not be output correctly.

x V. ASSIGN

Lets you assign the video input to other input 
source. For details, see “Enjoying the sound/
images from other inputs” (page 69).

You can make various adjustments for HDMI 
settings.

x CTRL: HDMI

Lets you turn the Control for HDMI function 
on or off. For details, see ““BRAVIA” Sync 
Features” (page 56).

x PASS THRU

Lets you output the HDMI signals to the TV 
even when the receiver is in standby mode. 
• ON

When the receiver is in the standby mode, 
the receiver continuously outputs HDMI 
signals from the receiver’s HDMI TV OUT 
jack.

• AUTO

When the TV is turned on while the receiver 
is in the standby mode, the receiver outputs 
HDMI signals from the receiver’s HDMI TV 
OUT jack. Sony recommends this setting if 
you use a TV that is compatible with 
“BRAVIA” Sync. This setting saves power 
in the standby mode compared with the 
“ON” setting.

• OFF

The receiver does not output HDMI signals 
when in the standby mode. Turn on the 
receiver to enjoy the connected component’s 
source on the TV. This setting saves power in 
the standby mode compared with the “ON” 
setting.

• This parameter is not available when “CTRL: 

HDMI” is set to “CTRL OFF”.

• When “AUTO” is selected, it may take a little more 

time for the image and sound to be output to the TV 
than when “ON” is selected.

• When the receiver is in standby mode, “HDMI” 

indicator will lights up if “PASS THRU” is set to 
“AUTO” or “ON”. However, when “PASS THRU” 
is set to “AUTO”, this indicator will lights off if no 
signals are detected.