Sony UP-DF500 Benutzerhandbuch

Mis

c

e

llan

eous

Precautions

22

Pull the lever toward you to open the front cover.

Wipe the thermal head with the wet pad.

Before wiping the thermal head, touch the metallic 
part of the unit to remove static electricity from 
your body.

• Be careful not to touch the surface of the thermal 

head with your hand.

• Do not discard the wet pad. This wet pad is used 

for the cleaning tasks to be performed on other 
parts of the unit.

• Since the thermal head is still very hot just after 

printing is finished, be careful not touch the 
thermal head. Touching the hot thermal head may 
cause a burn.

Wipe the platen roller (black rubber roller) gently.

Wipe the pinch roller (dark blue rubber roller).

Close the front cover.

Remove the film tray.
You can remove the film tray without pushing the 
EJECT TRAY button when the power is off.

Wipe the surface of the thermal head gently 
with the wet pad.

Thermal head

Wipe the platen roller gently with the wet pad 
while turning it.

Platen roller (black rubber roll)

Pinch roller (dark blue rubber roller)

Wipe the pinch roller gently with the wet pad 
while turning it.