Sony XR-C9100 Benutzerhandbuch
20
EN
Adding tracks to a program
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P 1” above.
mode appears. Press (4) (PLAY MODE) to
display “P 1” above.
To select Program 2, press (5) (n)
repeatedly until “P 2” appears.
repeatedly until “P 2” appears.
2
Press (2) (N) or (5) (n) to select the
track slot number where you want to
insert a track.
track slot number where you want to
insert a track.
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
to select the track you want to insert.
4
Press (6) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled,
“*Mem Full*” appears in the display, and you
cannot insert more tracks.
Once all 12 slots have been filled,
“*Mem Full*” appears in the display, and you
cannot insert more tracks.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Track slot number
PLAY
DISC
TRACK
MODE
ENTER
PLAY
DISC
TRACK
MODE
ENTER
4
Press (SHIFT).
To return to normal playback mode, select
“PGM off” in step 3 above.
“PGM off” in step 3 above.
Notes
• If you press a number button during program
• If you press a number button during program
memory play, program memory play is
interrupted, and playback of the selected disc
starts.
interrupted, and playback of the selected disc
starts.
• “NO Data” appears in the display if no track is
stored in the program.
• If a track stored into the program memory is not
in the disc magazine, the track will be skipped.
• When the disc magazine contains no tracks
stored into the program memory, or when the
program information has not been loaded yet,
“Not ready” appears.
program information has not been loaded yet,
“Not ready” appears.
Erasing an entire program
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P 1” above.
mode appears. Press (4) (PLAY MODE) to
display “P 1” above.
2
Press (2) (N) repeatedly until “DEL”
appears.
appears.
To erase Program 2, press (5) (n)
repeatedly until “PGM 2” appears.
repeatedly until “PGM 2” appears.
3
Press (6) (ENTER) for two seconds.
The entire program is erased.
4
When you finish erasing the programs,
press (4) (PLAY MODE) for two seconds.
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).
PLAY
DISC
TRACK
MODE
ENTER
PLAY MODE
ENTER
PLAY MODE
ENTER