Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Denon
  4. AVR-3310CI
  5. Benutzerhandbuch

Denon AVR-3310CI Benutzerhandbuch

Download
Seite von 22
ENGLISH
Connections
Set
tin
g
s
Pla
ybac
k
Inf
or
mation
Specifications
Get
ting Star
te
d
Una
vailable F
unctions 
Af
ter Upgr
ading
Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup)
s
 Audyssey Auto Setup Preparations
 
around items indicate the default setting.
Perform  the  following  settings  if  adjustments,  etc.,  are  required  for
the speaker environment you’re using.
If you do not need to perform the following settings, or have already
completed them, select “Auto Setup Start” and then press
ENTER
.
Proceed to “ STEP2 ”.
When you are using surround back speakers with ZONE2/ZONE3,
set to “ZONE2” or “ZONE3”.
You can set in the same way as described in “Amp Assign” on page
8.
•
•
Change the Amplifier Assignment (Amp Assign)
The  signal  output  from  the  SURR.BACK/AMP  ASSIGN  speaker
terminal of the AVR-3310CI can be switched to match your speaker
environment (vpage 8 “Amp Assign”).
1
Press 
ui
  to  select 
“Amp  Assign”,  then 
press 
ENTER
.
NOTE
Since  “Amp  Assign”  of  AVR-3310CI  is  set  to  “ZONE2”  by  default,
audio is not output from the surround back speakers. When using the
surround back speakers with MAIN ZONE, change the “Amp Assign”
setting to “Normal”.
v
page 30 of GThe original versionH Operating Instructions
d
 Perform Audyssey Auto Setup
Main remote control 
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting
:Return to previous menu
STEP1 Preparation
Set the channel to be measured (Channel Select)
v
page 30 of GThe original versionH Operating Instructions
v
page 29 of GThe original versionH Operating Instructions
a
  Connect the Included Setup 
Microphone
2
Press 
o
 
p
  to  select  Amp  Assign  Mode,  then  press 
RETURN
. 
Normal
ZONE2
ZONE3
ZONE2/3-MONO
Front A Bi-Amp
Front B Bi-Amp
Front Height
Front Wide
: The  surround  back  channel  audio  signals  are
output.
: The ZONE2 audio signals are output.
: The ZONE3 audio signals are output.
: The ZONE2 / ZONE3 monaural audio signals are
output.
: The bi-amp audio signals are output. Set this for
bi-amp playback of the front A speakers.
: The bi-amp audio signals are output. Set this for
bi-amp playback of the front B speakers.
: The front height channel audio signals are output.
: The front wide channel audio signals are output.
indicates functions added by upgrading.
NOTE
• Loud  test  sounds  may  be  played  during  Audyssey  MultEQ®
automatic speaker setup. This is part of normal operation. If there
is  background  noise  in  room,  these  test  signals  will  increase  in
volume.
• Do not stand between the speakers and setup microphone or allow
obstacles in the path while the measurements are being made. This
will cause inaccurate readings.
• Make the room as quiet as possible. Background noise can disrupt
the  room  measurements.  Close  windows,  silence  cell  phones,
televisions,  radios,  air  conditioners,  fluorescent  lights,  home
appliances, light dimmers, or other devices as measurements may
be affected by these sounds.
 Cell phones should be placed away from all audio electronics during
the  measurement  process  as  Radio  Frequency  Interference  (RFI)
may cause measurement disruptions (even if the cell phone is not in
use).
Operating
MASTER VOLUME 
during the measurements will cancel
the measurements.
•
Set
tin
g
s