Panasonic AG-MX70 Benutzerhandbuch

Seite von 102
88
Automatic transmission and playback of Title
data
The data from the cursor position to the end of the
transmission list can be transmitted automatically and DSK
playback can be performed automatically.
Select “Operation” 
> “Automatic title load” from the menu of
the main window.
Manual transmission and playback of Title
data
Data registered in the transmission list can be transmitted to
the AG-MX70 using the following procedure.
1) Move the cursor to the data to be transmitted and left
click on the data.
The yellow frame cursor moves to the selected data.
2) Select  “Operation” 
> “Load title” from the menu of
the main window.
The data is transmitted to the AG-MX70.
<Notes>
The time required for the transmission differs according to
the image size and the number of images.
Transmission is not possible when the image memory of
the AG-MX70 does not have the required free space.
Clear any data that is not required from the image
memory (refer to “Clearing Title data”) and repeat the
transmission operation.
Images cannot be transmitted while the “Loading...”
display appears on the LCD screen immediately after the
AG-MX70’s power has been turned on or immediately
after changes have been made to the image memory
settings.
While transmission is in progress, the LCD display of the
AG-MX70 shuts down.
DSK playback of the transmitted data is possible using the
following procedure.
1) Move the cursor to the data for DSK playback and left
click on the data.
The yellow frame cursor moves to the selected data.
2) Select  “Operation” 
> “Play” from the menu of the
main window.
DSK playback is performed for the data.
<Note>
In order to perform DSK playback for the data, it is
necessary to set Key and Fill to Title using the DSK/Fade
item on the DSK Fade menu of the AG-MX70.  For details,
refer to page 46.
Title data operations
1
2
3
4
1 The DSK status is displayed here.
2 The transmission status is displayed here.
3 This executes DSK ON/OFF.
4 This stops automatic loading.
<Notes>
Any data that has not been transmitted will be transmitted
automatically.  Transmission also will be executed during
playback of other data.
If the data transmission has not been completed by the
time the DSK playback stage is reached, standby status
will be maintained until it is completed.
After DSK playback, data without the Protect setting will
be cleared from the memory.
Clearing Title data
The data written to the image memory of the AG-MX70 will
be cleared only by a clearing operation or when the power
supply of the AG-MX70 is switched off.  When space is
required for transmission of new data, delete any data that
is not required.  The clearing operation is performed using
the following procedure.
1) Move the cursor to the data to be cleared and left
click on the data.
The yellow frame cursor moves to the selected data.
2) Select  “Operation” 
> “Clear the selected title” from
the menu of the main window.
The data is cleared.
<Notes>
When  “Operation” 
> “Clear all title” is selected from the
menu of the main window, all transmitted Title data will be
cleared.
Data for which Protect has been set will not be cleared by
this operation.  Clearing of data for which Protect has
been set must be done from the memory status screen.
(Refer to page 90.)