Panasonic AJ-PCD20P Benutzerhandbuch

E-9

(To be connected by IEEE1394b)
Connect the P2 drive to the personal
computer with a IEEE1394b cable.

<Notes>
z No IEEE1394b cable is supplied with the

P2 drive in the package. Use a
commercially available IEEE1394b cable.

z Before proceeding to

connect the unit which uses
a 6-pin type IEEE 1394
connector, carefully check
the shape of the
IEEE1394b cable and the
connectors on IEEE1394b
cable. Connecting a connector upside
down may damage the parts inside the
unit and cause malfunctioning.

z Do not apply force when connecting

IEEE1394b cable to IEEE1394b connector
as this may damage the connector. 

Verify that the personal computer recognises
the P2 drive.

<Notes>
z In Windows XP, some card slots of the P2

drive may be assigned drive names that
have already been assigned to existing
networks. Reassign network drive names
if your personal computer does not display
all five card slots.

z In Windows, to remove a USB cable or an

IEEE1394b cable, select “Safely Remove
Hardware” in the “Task Tray” and stop the
“Panasonic P2 Series USB/SBP2 Device”
before removing the cable.

z On an Apple Macintosh, to remove an

IEEE1394b cable, drag the icon of the P2
card to “Trash” and then confirm that the
P2 card icon disappears before removing
the cable.

USB 2.0

DC IN 16V

DC IN 12V

IEEE 1394b

P_AJ-PCD20.book  9 ページ  ２００６年６月２８日　水曜日　午前９時４９分