Panasonic ag-tl750 Benutzerhandbuch

29

 AG-

Connect the input and output connectors on the rear panel
correctly.  Refer to “CONNECTIONS” on pages 14 to 16.

Set menu switches as required.

5

ON SCREEN/FRONT DISPLAY MODE
• Select the brightness and ON/OFF for each indication

(date, time and recording speed, etc).

  During recording, the selected on-screen data is

recorded together with video signals.
If you do not want to display or record a specific item,
set it to “OFF”.

• <REC TALLY> setting
  Set whether or not the [REC] indicator lights in the

Record mode.

5

VIDEO MODE
• IN

Selects whether the input signal is LINE (composite
video signal) or S-VIDEO signal.

5

VTR MODE
• EXT TIMER REC

Set to “ON” for external timer recording or automatic
restart of recording after a power failure.  For details,
refer to “6-9 How to Restore Recording After Power
Failure” and “6-10 External Timer Recording” on page
45.

• AUTO REW

Select the mode engaged when the tape ends.
“OFF”: The Stop mode is engaged.
“ON”:

The tape automatically rewinds to the
beginning.

  When the <REPEAT REC> menu switch is set to “ON”,

repeat recording takes place regardless of the setting
of this switch.

• REPEAT REC
  Set to “ON” to perform repeat recording.  For details,

refer to “6-7 Repeat Recording” on page 43.

• AUTO REC CHECK
  Set to “ON” to perform Recording Check automatically

at the beginning of a tape in the Repeat Recording
mode.

5

SRI/EXT MODE
• SRI/EXT REC

- Set to “SERIES” to perform series recording.  For

details, refer to “6-6 Series Recording” on page 41.

- Set to “EXT” to execute automatic recording when

activated by an external signal.
For details, refer to “6-8 Recording with External
VCR Activation Signal” on page 44.

5

ALARM/SENSOR MODE
• REC MODE

- For alarm recording, set to “ALARM” or “AL/

SENSOR”.  For details, refer to “6-4 Alarm
Recording” on page 38.

- For sensor recording, set to “SENSOR” or “AL/

SENSOR”.  For details, refer to “6-5 Sensor
Recording” on page 40.

5

BUZZER
• TAPE END

Set to “ON” if you want the buzzer to sound when the
tape ends during recording.

5

IN/OUT
• CAMERA SW

Set the camera switching timing signal output to an
external sequential switcher during recording.
- To switch cameras every 1 field or 1 frame, set this

menu switch to “1 FIELD” or “2 FIELD”. (However 1
frame when on 3H mode REC.)

When a VHS cassette is loaded in this unit, recording is
performed in the S-VHS ET mode. Use a HG (high-
grade) type tape for recording in the ET mode.
A VHS tape recorded in the S-VHS ET mode cannot be
played back on a normal VHS type video deck.
It is recommended that you mark the label on the
cassette so that you know that it is recorded in the S-
VHS ET mode. Playback should be performed on this
unit, or on a video deck equipped with function for S-
VHS or S-VHS simple playback (SQPB). However,
playback may not be possible on some video decks
equipped with function for S-VHS or S-VHS simple
playback (SQPB). (This is due to differences in the way
S-VHS/VHS is distinguished by the various units.)