Panasonic ag-tl750 Benutzerhandbuch

46

 AG-

1

Press the [ 

 ] button to turn the operating mode on.

The [ 

 ] indicator lights.

2

Press the [TIME MODE +/–] button to set the play mode
to 3H (SP) mode.

The [3H] indication is shown on the display.

• To play back a tape recorded in the timelapse mode

at slow speed, press the [TIME MODE +/–] button
to set the desired mode (L12H, L24H ..... 960H)
(slow play).

• Avoid using slow-motion playback continuously for

long periods (more than several hours).

3

Load the recorded cassette correctly.

* If a cassette is loaded when the operating mode is off,

the operating mode is switched on automatically (auto
operate on function).
If the cassette’s safety tab has been removed, the
operating mode is turned on and play starts
automatically (auto play function).

4

Press the [PLAY] button to start play.

The play indicator is shown on the display and
the Play mode is engaged.

* No sound is output in the Timelapse Play mode

(except for L12H and L24H modes).

5 Press the [STOP] button.

The tape stops and the Stop mode is engaged.

* To listen to the sound recorded in the L12H and

L24H modes, playback the tape in the same mode
used for recording (L12H or L24H).

* When a tape recorded in the 3H mode is played

back in the L12H or L24H mode, noise appears in
the picture.
Press the [TIME MODE +/–] button to set the
playback speed to 3H and start playback.

* Noise may appear in the picture with tapes not

* Tapes recorded in the LP mode cannot be played

back.  In this case, the “LP” indication blinks on the
display

Cautions for playback of S-VHS ET recorded tapes
• Avoid operations that applies a load to the tape,

such as search playback, etc. This will result in
deteriorating picture quality.

• Due to the performance of the unit, noise may

appear in the playback picture during search
playback and field advance.

Connect the output connectors on the rear panel correctly.

Set the menu switches in <VIDEO/VTR MODE> as
required.

5

[DETAIL] ... Factory setting: OFF
To make details of the playback picture clearer, set to
“ON”. However, the S/N ratio deteriorates.

5

[QUASI-V] ... Factory setting: OFF
Set to “ON” to add QUASI-V in the 3H (SP) play mode.

5

[MEMORY STOP] ... Factory setting: OFF
Counter memory ON/OFF.
• Set to “ON” to use the counter memory function.

5

[AUTO REW] ... Factory setting: OFF
Automatic rewind ON/OFF.
• Set to “ON” to rewind the tape to the beginning when

the tape ends.

5

[REPEAT PLAY] ... Factory setting: OFF
Repeat playback ON/OFF.
• Set to “ON” to execute repeat playback.