Panasonic ag-tl750 Benutzerhandbuch
6
1-1 Major Features
1 INTRODUCTION
5
S-VHS/S-VHS ET recording
S-VHS or S-VHS ET is employed as the recording
mode. Employing the S-VHS ET recording mode
enables recording with a horizontal resolution of 400
lines on a VHS cassette. The VHS mode is only
available for playback.
S-VHS or S-VHS ET is employed as the recording
mode. Employing the S-VHS ET recording mode
enables recording with a horizontal resolution of 400
lines on a VHS cassette. The VHS mode is only
available for playback.
5
Extended timelapse recording for up to 960 hours
Recording times are selectable from 3 hours (SP mode)
and L12/L24/24/48/72/120/168/240/480/960 (Timelapse
mode) (when E-180 tape is used).
In the L12 and L24 Timelapse modes, sound is recorded
as well.
• Recording and playback are not possible in the Long
Recording times are selectable from 3 hours (SP mode)
and L12/L24/24/48/72/120/168/240/480/960 (Timelapse
mode) (when E-180 tape is used).
In the L12 and L24 Timelapse modes, sound is recorded
as well.
• Recording and playback are not possible in the Long
Play (LP) mode.
• L12/L24 modes cannot be selected for S-VHS ET
recording.
When a tape recorded on this unit is played back on
another VCR, noise may appear on playback picture.
another VCR, noise may appear on playback picture.
5
Alarm recording function
When an alarm signal is input in the Record mode, the
3-hour mode is automatically engaged. Alarm recording
time can be selected from 5, 10, 15, 30, 60, 120, or 180
sec., to CONTINUE, or set manually.
An index code is automatically recorded at the start
point of the alarm recording for use as an alarm cue
signal. Alarm recording points can be accessed quickly
with the alarm search function.
When an alarm signal is input in the Record mode, the
3-hour mode is automatically engaged. Alarm recording
time can be selected from 5, 10, 15, 30, 60, 120, or 180
sec., to CONTINUE, or set manually.
An index code is automatically recorded at the start
point of the alarm recording for use as an alarm cue
signal. Alarm recording points can be accessed quickly
with the alarm search function.
5
Sensor recording
Whenever an alarm signal is input in the Stop mode
(Stop, Timer Recording Standby or Operating Off
mode), the Record mode is automatically engaged.
mode), the Record mode is automatically engaged.
5
Time/date generator
Superimposes date, month, year, hour, minute and
second on the image during recording. Also allows you
to display the number of alarms, alarm time, and the
number of the power failures on a monitor.
Superimposes date, month, year, hour, minute and
second on the image during recording. Also allows you
to display the number of alarms, alarm time, and the
number of the power failures on a monitor.
5
Timer-recording function
Up to 8 programme can be set for daily, weekly, or
weekday timer-recording. You can also set timer
recording for up to 16 days a year by specifying the date
(holidays, for example).
Up to 8 programme can be set for daily, weekly, or
weekday timer-recording. You can also set timer
recording for up to 16 days a year by specifying the date
(holidays, for example).
5
Tape position search function
You can automatically search the start of an alarm
recording or search for a recording made at a specified
date and time.
date and time.
5
Recording check function
Recording conditions (quality) can be checked at any
time during recording by pressing the REC REVIEW
button.
Recording conditions (quality) can be checked at any
time during recording by pressing the REC REVIEW
button.
5
Operation lock system
The secret operation lock system prevents an accidental
or deliberate interference with VCR operation.
The secret operation lock system prevents an accidental
or deliberate interference with VCR operation.
5
Camera switching signal output terminal
5
Warning function
Error indications are shown on the front panel display.
Error warnings include condensation and problems with
cassette loading, cassette unloading, or the rotating
system operation mode.
Error indications are shown on the front panel display.
Error warnings include condensation and problems with
cassette loading, cassette unloading, or the rotating
system operation mode.
5
Operating mode-off video throughout function
Even when the operating mode is off, the camera’s EE
input can be output from the VCR.
Even when the operating mode is off, the camera’s EE
input can be output from the VCR.
5
Series recording function
Two or more AG-TL750B/E can be connected for
extended, long-term series recording. As the tape in
each VCR reaches the end, the next unit in the series
will automatically start recording.
Two or more AG-TL750B/E can be connected for
extended, long-term series recording. As the tape in
each VCR reaches the end, the next unit in the series
will automatically start recording.
5
Time adjust function
With the IN/OUT terminal for time adjustment, the time
difference can be set to “0” with multiple AG-TL750B/E
connected. (adjustment time: 00:00/12:00)
With the IN/OUT terminal for time adjustment, the time
difference can be set to “0” with multiple AG-TL750B/E
connected. (adjustment time: 00:00/12:00)
5
Digital hour meter display
5
Repeat playback/recording
5
Alarm recording, tape end and warning electronic
buzzer
buzzer
5
Recording control with external activation signal
5
Counter end function
5
External timer connection
5
Summer time compensation function