Panasonic AJ-HD1400P Benutzerhandbuch

40

*1 Displayed menus may vary depending on the settings in

menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).

“_____” indicates the factory setting.

To set the transition method to search mode (stick 
operation).
0000

Shift to the search mode when the SEARCH button 
is pressed or when the stick is operated.

Do not shift to the search mode unless the 
SEARCH button is pressed.

For setting the maximum speed in the shuttle mode.
0000

8.4

k normal speed

16

k normal speed

32

k normal speed

<Note>
The maximum speed for the HD SP mode is 
automatically limited to 25

k normal speed.

For setting the maximum speed of fast forward or 
rewind operations.
0000

16

k normal speed

32

k normal speed

50

k normal speed

<Notes>
z The maximum speed for the HD SP mode is 

automatically limited to 25

k normal speed.

z The maximum speed for the DV and DVCAM 

modes is automatically limited to 32

k normal 

speed.

For setting whether a warning is to be displayed when 
the REF VIDEO signal is not connected.
0000

No warning is displayed.

A warning is displayed by the flashing STOP lamp.

For setting the mode of the VTR, which becomes the 
EE state when menu item No. 140 OUTPUT is set to 
“EE.”
0000

The mode changes to the EE state when this item 
is set to STOP, FF, or REW.

The mode changes to the EE state only when this 
is set to STOP.

For setting the output conditions of video images and 
voice when ejecting the tape.
0000

Both the video and audio signals are always output 
in the EE (electric modulation to electric playback) 
mode regardless of the setting of the menu No.140 
OUTPUT.

The output status differs according to the setting of 
the menu No.140 OUTPUT.
EE:

The signals are output in the EE mode.

TAPE: BLACK is output for the video, and the

audio is muted.

The output status differs according to the setting of 
the menu No.140 OUTPUT.
EE:

The signals are output in the EE mode.

TAPE: GRAY is output for the video, and the audio

is muted.

<Note>
When “23/24” mode, “25 (HD/SD)” mode, or “50 (HD/
SD)” mode is selected in menu No. 25 SYSTEM 
FREQ, BLACK is output if “EE” is selected.

For setting the HD SDI and HD analog component 
output signals in EE mode when HD SDI input is 
selected.
0000

Signals delayed by the time taken by internal signal 
processing are output.

Signal processing is not undertaken internally, and 
the signals are output without delay at their original 
timing.

<Notes>
z The superimposed information is not displayed 

when THRU is used as the setting.

z When 1394 or SG is selected for the input signal in  

edit mode, internal signal is selected forcibly  
“NORMAL”.

For setting the play rise time in frame increments.
0000

For selecting in how many field increments the 
playback framing is to be locked.
0000

<Notes>
z “8F” can be selected only when “50i/25p” is 

selected as the menu item No.25 SYSTEM FREQ 
setting.

z In the HD LP or HD SP mode, 2F mode is selected 

when recording and playing back, including editing, 
regardless of the menu.

For setting whether the tape is to be automatically 
rewound to its beginning when the tape end is detected.
0000

The tape is not rewound.

The tape is rewound to its beginning.

For setting the video output when the mode is 
transferred from playback images to standby OFF 
(half loading) mode or EJECT mode.
0000

The video output is muted.

When the standby OFF (half loading) mode is 
established, the image played back at that moment 
is frozen and output.

When in the STANDBY OFF mode and the EJECT 
mode, the image played back at that moment is 
frozen and output.

<Notes>
z The frozen status will be according to the settings 

in menu No. 604 FREEZE SEL.

z In the EJECT mode, the frozen image will be 

output only when setup No. 106 EJECT EE is the 1 
(BLACK) or 2 (GRAY) setting.

For setting the operation of the REC INHIBIT lamp when 
the cassette is set to the erasure prevention status.
0000

The lamp lights.

The lamp flashes.

<Note>
When the REC INHIBIT switch on the front panel is set 
to ON, the REC INHIBIT lamp lights at all times 
regardless of what setting is selected for this menu item.