Panasonic AJ-HD1400P Benutzerhandbuch
43
Setup menus
(continued)
OPERATION (continued)
*1 Even if the RESET button is pressed while pressing the
SEARCH button, the value may not return to the factory
setting.
setting.
*2 Displayed menus may vary depending on the settings in
menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).
“Menus which are displayed” (page 32).
INTERFACE
“_____” indicates the factory setting.
No./Item
Description of setting
181*
1
TYPE-A
NEAR
NEAR
For setting (in increments of 0.1 V) the voltage level at
which the counter flashes as warning for TYPE-A
battery (selected as the menu item No.180 BATTERY
SEL item).
Use when adjusting the settings for multiple batteries
or new type batteries.
0000
which the counter flashes as warning for TYPE-A
battery (selected as the menu item No.180 BATTERY
SEL item).
Use when adjusting the settings for multiple batteries
or new type batteries.
0000
10.6
: :
0023
0023
12.9
: :
0044
0044
15.0
<Note>
When this item has been set to a voltage level close
to 15.0 V, the counter display may flash even when an
AC power source is being used.
When this item has been set to a voltage level close
to 15.0 V, the counter display may flash even when an
AC power source is being used.
182*
1
TYPE-A END
For setting (in increments of 0.1 V) the voltage level at
which the TYPE-A battery (selected as the menu item
No.180 BATTERY SEL item) is to be automatically
turned off.
Use when adjusting the settings for multiple batteries
or new type batteries.
0000
which the TYPE-A battery (selected as the menu item
No.180 BATTERY SEL item) is to be automatically
turned off.
Use when adjusting the settings for multiple batteries
or new type batteries.
0000
10.6
: :
0018
0018
12.4
: :
0034
0034
14.0
183*
1
TYPE-B
NEAR
NEAR
For setting (in increments of 0.1 V) the voltage level at
which the counter flashes as warning for TYPE-B
battery (selected as the menu item No.180 BATTERY
SEL item).
Use when adjusting the settings for multiple batteries
or new type batteries.
0000
which the counter flashes as warning for TYPE-B
battery (selected as the menu item No.180 BATTERY
SEL item).
Use when adjusting the settings for multiple batteries
or new type batteries.
0000
10.6
: :
0023
0023
12.9
: :
0044
0044
15.0
<Note>
When this item has been set to a voltage level close
to 15.0 V, the counter display may flash even when an
AC power source is being used.
When this item has been set to a voltage level close
to 15.0 V, the counter display may flash even when an
AC power source is being used.
184*
1
TYPE-B END
For setting (in increments of 0.1 V) the voltage level at
which the TYPE-B battery (selected as the menu item
No.180 BATTERY SEL item) is to be automatically
turned off.
0000
which the TYPE-B battery (selected as the menu item
No.180 BATTERY SEL item) is to be automatically
turned off.
0000
10.6
: :
0018
0018
12.4
: :
0034
0034
14.0
190*
2
V IN SEL INH
For selection of the video input switching mode with
the INPUT SELECT switch.
0000
the INPUT SELECT switch.
0000
OFF :
Video input switching with the INPUT SELECT
switch is enabled.
switch is enabled.
0001
ON :
Video input switching with the INPUT SELECT
switch is prohibited.
switch is prohibited.
0002
REC :
After this unit shifts to recording (except editing),
video input switching with the INPUT SELECT
switch is prohibited.
video input switching with the INPUT SELECT
switch is prohibited.
No./Item
Description of setting
191*
2
A IN SEL INH
Select the audio input switching mode with the INPUT
SELECT switch.
0000
SELECT switch.
0000
OFF :
Select the audio input switching mode with the
INPUT SELECT switch.
INPUT SELECT switch.
0001
ON :
Video input switching with the INPUT SELECT
switch is prohibited.
switch is prohibited.
0002
REC :
After this unit shifts to recording (except editing),
video input switching with the INPUT SELECT
switch is prohibited.
video input switching with the INPUT SELECT
switch is prohibited.
No./Item
Description of setting
202
ID SEL
ID SEL
For setting the ID information to be returned to the
controller.
0000
controller.
0000
OTHER :
The ID information of the VTR other than DVCPRO
is set.
is set.
0001
DVCPRO :
The DVCPRO ID information is set.
0002
ALL :
Set this only when the unit is connected to a
Panasonic controller (such as the AG-A850,
optional accessory).
Panasonic controller (such as the AG-A850,
optional accessory).
<Note>
Select 1 (DVCPRO) or 2 (ORIG) if “23/24,” “25(HD),”
“25(SD),” “50(HD)” or “50(SD)” is selected as the
menu item No.25 SYSTEM FREQ setting.
Select 1 (DVCPRO) or 2 (ORIG) if “23/24,” “25(HD),”
“25(SD),” “50(HD)” or “50(SD)” is selected as the
menu item No.25 SYSTEM FREQ setting.