Panasonic AJ-HD1400P Benutzerhandbuch

60

If “T&S&M” is selected in the menu No. 008 DISPLAY SEL, a message appears in the modedisplay whenever a warning or
error occurs. When multiple events occur, the event with the highest priority is displayed.

This is displayed when UMID information is present on the input signal in EE mode.
This lamp lights during tape playback when UMID information has been recorded on the tape. “NO-INFO” is displayed when
there is no UMID information.

When an operational malfunction has occurred in the unit, the error number flashes and the 
error message is indicated on the counter display.

When SG has been selected as the input signal by the INPUT SELECT button, the “INT SG” 
display will appear for the first two seconds at the start of operation (EE mode) when the REC 
button is pressed.

If there are no input signals--with the exception of the analog audio signals-- supplied to the 
connectors selected by the INPUT SELECT button, the “NO INPUT” display will appear for the 
first two seconds at the start of operation (EE mode) when the REC button is pressed.

When a warning occurs in this unit, the error number and warning message are indicated on the 
counter display.  When multiple warnings occur, the warning with the highest priority is 
displayed.

Material number

Instance number (No. of copies)

Country, organization, user

Reception status from GPS satellites when recording spatial coordinates 
(height above sea level, longitude and latitude):
HOLD: No reception from any satellite
2D:

Reception possible, but number of satellites is insufficient. Height
above sea level will not be accurate.

Good reception

Date

UTC (Coordinated Universal Time) and time difference with UTC