Panasonic BT-LH1800 Benutzerhandbuch

[INPUT SELECT] 

>[LINE A,B/S-VIDEO]    AUTO

 NON-STANDARD           OFF

 [SDI]                 AUTO

  

                

INPUT SELECT SDI menu

[INPUT SELECT] 

>[LINE A,B/S-VIDEO]    AUTO

 NON-STANDARD           OFF

 [YPbPr/RGB]          YPbPr

 YPbPr                 AUTO

 COMPONENT LEVEL      SMPTE

 [RGB]                 AUTO

 RGB-SYNC               EXT

             

                

INPUT SELECT YPbPr/RGB menu

[MAINTENANCE] 

 RUNNING TIME            

  OPERATION              0H

  LCD                    0H

  BACKLIGHT              0H

  FAN                    0H   

                

MAINTENANCE menu

_ SDI input unit mounted [BT-Y200P]

SDI
Used to set the input format of SDI.
Set-value (underlined is default value)

AUTO

480/60I*

1)

576/50I

*

1)

 480/59.94I signal is displayed as 480/60I.

_ Component/RGB input unit mounted [BT-YA100P]

YPbPr/RGB
Used to select the input of YPbPr/RGB.
Set-value (underlined is default value)

YPbPr

RGB

YPbPr
Used to select the format in case of YPbPr input.
Set-value (underlined is default value)

AUTO*

1)

1080/60I*

2)

1080/50I

1080/24psF

1035/60I*

2)

720/60P*

3)

576/50I

480/60P*

4)

480/60I*

4)

COMPONENT LEVEL (480/60I only)
Used to select the input level of component.  Select SMPTE
for the signal from MII VTR, and B75 for the signal of 7.5%
setup of Betacam VTR.
Set-value (underlined is default value)

SMPTE

B75

RGB
Used to select the format in case of RGB input.
Set-value (underlined is default value)

AUTO*

1)

1080/60I*

2)

1080/50I

1035/60I*

2)

720/60P*

3)

576/50I

480/60P*

4)

480/60I*

4)

RGB-SYNC (When RGB is input.)
Used to select Ext. Sync/GREEN-On-SYNC.
Set-value (underlined is default value)

EXT

G-ON

*

1)

In AUTO setting, the settings of display size, status display, and

matrix are same as for 1080I even in case of 1035I input.  When
desired to use 1035I setting, set it to 1035/60I.

*

2)

1080/60I and 1035/60I are different with respect to the display

size and the matrix used.  Select 1080/60I and 1035/60I even in
case of 1080/59.94I and 1035/59.94I signal input.  The status will
be correctly displayed on the screen.

*

3)

Select 720/60P even in case of 720/59.94P signal input.  The sta-

tus will be correctly displayed on the screen.

*

4)

480/59.94I and 480/59.94P signals are displayed as 480/60I and

480/60P.

With MAINTENANCE selected, the following menu will ap-
pear.

OPERATION
The total operation time of the whole LCD monitor is displayed.

LCD
The operation time of the LCD panel is displayed.

BACKLIGHT
The operation time of the backlight is displayed.

FAN
The operation time of the exhaust fan is displayed.