Panasonic cq-c9800u Benutzerhandbuch

Seite von 33
60
CQ-C9800/9700U
CQ-C9800/9700U
61
Troubleshooting 
(continued)
E
N
G
L
I
S
H
41
E
N
G
L
I
S
H
42
CD Changer Control
Note:
≥ Messages in the action and display sections of the error chart vary with changers. 
  Refer to the operating instructions of the CD changer for details.
Disc is dirty, or is upside down.
Check the disc. 
(The changer automatically switches 
to the next disc.)
A disc other than a music CD 
(CD-DA type) is loaded.
Display
Possible cause
Possible solution
Disc has scratches.
Check the disc. 
(The changer automatically switches 
to the next disc.)
No operation by some cause.
If normal operation is not restored, 
call the store where you purchased 
the unit or the nearest Panasonic 
Servicenter to ask for repairs.
The display continues if you cannot 
switch off the power.
No disc is in the changer 
(magazine).
Insert discs into the changer 
(magazine).
The dual CD changer selector is 
connected but the changers are not 
connected.
Verify that correct connections have 
been made.
The changer has become 
disconnected from this unit in the 
changer mode.
Maintenance
Your product is designed and manufactured to 
ensure a minimum of maintenance. Use a dry and 
soft cloth for routine exterior cleaning. Never use 
benzine, thinner or other solvents.
Product Servicing
If the suggestions in the charts do not solve the 
problem, we recommend that you take it to your 
nearest authorized Panasonic Servicenter. The 
product should be serviced only by a qualifi ed 
technician.
Fuse
Use fuses of the same specifi ed rating (15 A). Using 
different substitutes or fuses with higher ratings, 
or connecting the unit directly without a fuse, could 
cause fi re or damage to the unit. 
If the replacement fuse fails, contact your nearest 
Panasonic Servicenter for service.
Customize Function
No customize-specifi c data on the 
disc.
Load a disc that contains 
customize-specifi c  data.
Display
Possible cause
Possible solution
Customize failed.
Check to see whether or not the 
extension is correct and fi le contents 
are appropriate.
Intended moving image or still 
image is damaged.
Customize it again and overwrite the 
fi le with new one.
NO FILES DETECTED
CUSTOMIZING 
FAILED
DISPLAY FILE 
INCOMPLETE