Panasonic cy-vhd9401n Benutzerhandbuch

Seite von 14
34
CY-VHD9401N
CY-VHD9401N
35
Before Installation
Display Unit Lateral Angle 
Adjustment
You can swivel it to the left and right, 30˚ each way. 
Hold the display unit by the non-slip part in the 
upper half of it and adjust its lateral angle.
Open the Display Unit
1
 Push the display release button [PUSH OPEN] 
until the display is unlocked.
  (Press the button with one hand while holding 
the display with the other.)
2
 Open the display unit by both hands until a 
comfortable viewing angle is reached. 
Close the Display Unit
Move the display unit by both hands until the 
display release button is locked. 
Note:
≥ Always use both hands to open or close the 
display unit.
≥ Always check that the display release button is 
locked after closing the display unit.
≥ If the display unit cannot be locked, be sure to 
consult your dealer and remedy the situation.
[PUSH OPEN]
Safety Installation Diagram
≥ This unit opens and closes at the maximum dimensions given below. 
      WARNING: 
Have a professional technician wire and install the product. 
Professional skill and experience is required to wire and install the product. Improper installation could 
result in failure of safety equipment resulting in accident and injury. For safety’s sake, always ask the 
store from which you purchased the product to install and wire it for you.
Approximately 150 mm*
Approximately 
300 mm
Maximum 
120˚
Approximately 300 mm
*  Install the product in such a way as to maintain 
the distances shown even when the display unit 
is rotated by 30˚ toward the front seat headrest 
(page 35).
Installation angle: Less than 20˚
Perform the adjustment below in order to provide the installation range shown in the fi gure on the left. 
Maximum 
120
x
30
x
30
x
E
N
G
L
I
S
H
1
E
N
G
L
I
S
H
2