Panasonic dvd-s32 Benutzerhandbuch

RQT8

68

5

§1 

[Unit\with\PX\printed\on\the\outer\packaging]

§2 

[Except[The\United\Kingdom]

§3 

[The\United\Kingdom,\Australia\and]N.Z.]

≥ This problem is caused by the editing method or material 

used on DVD-Video, but should be corrected if you use 
interlace output. Change “VIDEO OUT (I/P)” in “VIDEO” tab 
to “INTERLACE”. (14)

≥ If the unit is connected to the television through VIDEO OUT 

or S VIDEO OUT

§2

, output will be interlace.

§1

≥ When progressive output is on, closed captions will not be 

displayed.

≥ Set Advanced Surround to “OFF”. (13) 
≥ Set Attenuator to “ON” if it causes distortion. (13)

≥ If you have connected a digital amplifier which does not 

include decoder, be sure to set “DOLBY DIGITAL”, “MPEG

§3

 

to “PCM” and set “DTS” to “OFF” in “AUDIO” tab. (15)

≥ None of the audio effects work when the unit is outputting 

bitstream signals from the COAXIAL terminal. (6)

≥ Some audio effects do not work or have less effect with 

some discs.

≥ You cannot record MP3.
≥ You cannot record DVDs that have protection preventing 

digital recording.

≥ You cannot record DVDs if the recording equipment cannot 

handle signals with a sampling frequency of 48 kHz.

≥ Make the following settings:

– Advanced Surround:

OFF (13)

– DOWN SAMPLING:

ON (15)

– DOLBY DIGITAL/MPEG

§3

:

PCM (15)

– DTS:

OFF (15)

≥ You inserted a disc the unit cannot play; insert one it can. (4)
≥ You inserted a blank disc.
≥ You inserted a disc that has not been finalized. (4)

≥ The disc may be dirty. (18)
≥ You haven’t inserted the disc correctly: Insert it correctly. (8)

∑∑”

∑∑ stands for a 

≥ Trouble may have occurred. The number following “H” 

depends on the status of the unit. Turn the unit off and then 
back to ON. Alternatively, turn the unit off, disconnect the AC 
mains lead, and then reconnect it.

≥ If the service numbers fail to clear, note the service number 

and contact a qualified service person.

≥ You haven’t inserted a disc: Insert one.
≥ You haven’t inserted the disc correctly: Insert it correctly. (8)

/”

≥ The operation is prohibited by the unit or disc.

≥ You haven’t inserted a disc: Insert one.

≥ You inserted a disc the unit cannot play; insert one it can. (4)
≥ You inserted a disc that has not been finalized. (4)
≥ You inserted a blank disc.

≥ You can only play DVD-Video if their region number is the 

same or includes the same region number as the unit or if 
the DVD-Video is marked “ALL”. Confirm the region number 
for the unit on the rear panel. (Cover)

RQT8685-2B.fm  Page 17  Tuesday, April 25, 2006  9:05 AM