Panasonic elite panaboard ub-t781 Benutzerhandbuch

After assembling the elite Panaboard, confirm that it operates properly by following the procedure below.

1 Turn on the power.

Green LED lights.

(Normal operation)

Green LED does not light, or

red LED is blinking.

Check the power cord.

See step 1 of "Assembling the elite Panaboard".

•

® page 52

•

® page 55

Following the procedure in "Installing the elite Panaboard software" (page 22), install the software

•

If a projector is not available, confirm operation using only the elite Panaboard and computer.

•

When the elite Panaboard software starts, the calibration screen is displayed on the computer screen.

•

Perform tentative calibration by pressing the 5 points on the elite Panaboard with the electronic pen,

as shown in the illustration below.

For precise adjustment, it is necessary to use a projector.

Approx. 
100 mm (3 

7

/

8

 in.)

Approx. 100 mm (3 

7

/

8

 in.)

1

3

4

5

2

•

With the elite Panaboard software running, enter White Background mode and select the marker tool.

Confirm operation by writing on the screen board with the electronic pen and checking that the writing

is displayed on the computer's screen. (Your writing with the electronic pen will not appear on the

screen board itself.)

Operating Instructions (For Basic Operations)

57